CSS DB9-DB9/DB9 - Y-Splitter
(1x Male and 2x Female)
Need to split your CSS CAN bus?
CSS DB9-DB9/DB9 - Y-Splitter is a low cost DB9 (D-sub 9) Y-splitter cable lets you easily split a single CAN bus DB9 connector into two connectors. This is achieved via the quality overmolded male-to-female/female DB9 connectors.
CSS DB9-DB9/DB9 adapter is ideal for connecting multiple CAN devices to a single port - or e.g. daisy chaining CAN modules.
About the CSS DB9 Y-Splitter
CSS DB9 Y-splitter lets you easily extend and branch out your CAN bus to e.g. add additional CAN nodes.
CSS DB9 Y-splitter is e.g. useful if you need to daisy chain multiple modules together or provide access for multiple devices through a single CAN bus port.
CSS DB9 Y-splitter is compatible with CSS CANedge loggers, CSS CANsub USB/Ethernet interfaces and CSS CANmod sensor-to-CAN modules.
CSS Dual CAN Telematics
CSS DB9-Y-splitter is e.g. often used in J1939 use cases to let you log data via both Channel 1 and 2 of a CSS CANedge - while at the same time connecting an external module like the CSS CANmod.gps or CSS CANmod.temp.
Technical Specifications
| General | |
|---|---|
| Adapter Cable Length | 25 CM |
| Adapter Pins | In accordance with CiA 303-1 |
| Compatibility | High Speed CAN Bus (ISO 11898-2) incl. CAN FD, SAE J1939, OBD2, NMEA, CANopen |
| Cable Thickness | 22 AWG (0.50 mm2) |
| Connectors | 9-Pin D-Sub (DB9) male-to-female to female |
| Temperature | Operating temperature: -20degC to +80degC |
Adapter Pinout
| DB9 (female 1) | Function | DB9 (male) | DB9 (female 2) |
|---|---|---|---|
| 1 | 5V Supply Output (CANedge) | 1 | 1 |
| 2 | CAN-L | 2 | 2 |
| 3 | GND | 3 | 3 |
| 4 | LIN Data 1 (CANedge) | 4 | 4 |
| 5 | N/C | N/C | |
| 6 | GND (optional) | 6 | 6 |
| 7 | CAN-H | 7 | 7 |
| 8 | N/C | N/C | |
| 9 | VCC | 9 | 9 |