YateSMSC
Short Message Service Center (SMSC) for GSM, UMTS and LTE networks

YateSMSC it’s a conventional Short Message Service Center with the functions of receiving, forwarding, storing and delivering SMSs in GSM, UMTS, LTE or custom networks. In addition to delivering Subscriber to Subscriber messages it can also implement various Application to Subscriber and Subscriber to Application scenarios.
A full featured, fully documented SMSC
Easy to operate SMSC solution for MNOs, MVNOs, private networks and labs using a JSON API through YateMMI web-interface.
YateSMSC, as well as other Yate solutions, offers a JSON API for configuration that can be used to setup SS7/SMPP interfaces, configure general network settings, request delivery of SMS and others.
The IP used to access the JSON API is provisioned by YateMMI (Mobile Management Interface) or can be set by hand.
Features and benefits

- Fully implemented in software and uses commodity hardware.
- Runs in a virtual machine in a datacenter facility or in cloud.
- Low deployment and per-subscriber cost.
- Uses standard SS7/MAP and SMPP interfaces.
- Allows all-IP interfaces, SIGTRAN for MAP interconnects.
- SMPP use for operator interconnect and applications.
- JSON / HTTP delivery for easy application development.
- Custom routing of messages to MAP, SMPP or HTTP URL.
- Uses JSON API for configuration and control.
- Management via a web-based interface, YateMMI.
- Allows monitoring via SNMP, Zabbix or JSON API.
SMSC software specifications

Operating system
Linux based, 64 bit

SS7 interface
SIGTRAN M2PA or M3UA, SCTP/IP

SS7 MTP, SCCP
ITU-T or ANSI dialects

MAP protocol
ETSI MAP versions 1, 2 and 3

SMPP interface
SMPP version 3.4

SMPP security
SMPP over TLS supported

CLI interface
Telnet protocol

JSON API
Over HTTP or HTTPS

JSON delivery
Configurable, templated HTTP or HTTPS URL

Online charging
Diameter, RADIUS or JSON API

CDR
File based, RADIUS or JSON API

Supported messages
250 per second
Hardware recommendations

Dell PowerEdge R430
3.5″ Chassis with up to 4 Cabled Hard Drives

Processor
Intel Xeon E5-2630 v3 2.4GHz,20M

Memory
8GB RDIMM, 2133MT/s, Dual Rank, x8 Data

Hard drives
2 x 1TB 7.2K RPM SATA 6Gbps 3.5in Cabled Hard

Hard drive configuration
RAID 1 for H330/H730/H730P (2 HDDs) with Cabled Chassis

Internal controller
DVD ROM SATA Internal for 4HD Chassis

Network adapter
Intel Ethernet I350 DP 1Gb Server Adapter, Low Profile

Power supply
550W

Rack support
ReadyRails™ Sliding Rails With Cable

Network adapter
Intel Ethernet I350 DP 1Gb Server Adapter, Low Profile