6inch Collector Rain Gauge
6inch Collector Rain Gauge
TR-525I Tipping Bucket Rain Gauge.
Available with optional Heater and or Siphon
Description
Texas Electronics TR-525I Tipping Bucket Rain Gauge with 6" diameter funnel is a remote tipping bucket style rain gauge that measures liquid precipitation. The Rain Gauge is a freestanding receptacle for measuring precipitation. Through an opening at the top of the device, rain is collected and then funneled to a mechanical device, called a tipping bucket. As water is collected, the tipping bucket fills to the point that it tips over, causing a momentary closure of a switch to incrementally measure rainfall accumulation. This action empties the bucket in preparation for additional measurement. Water discharged by the tipping bucket passes out of the rain gauge with no need for emptying. The TR-525I is a rugged and reliable rain research grade gauge that delivers high accuracy at a low cost.
Specifications
| Weight | 5.0000 lbs |
| Accuracy | 0.2 in. (50 mm) per hour; +/-1% |
| Bucket | Black PP injection molded |
| Collector Diameter | 6.06" (163 mm) |
| Funnel Depth | >6.5" (165 mm) |
| Heater Option | For more information |
| Humidity Limits | 0 to 100% |
| Operating Temp | 32 to 158°F (0 to 70°C) |
| Range | 27" (700 mm) per hour maximum |
| Storage Temp | -40 to 185°F (-40 to 85°C) |
| Switch Closure Time | 135 ms |
| Weight | 1.6 lbs. |
| Dimensions | 20 x 12 x 10 in |
| Bounce Setting Time | 0.75 ms |
| Cable | 10', 24 gauge 2 conductor (longer length available on request) |
| Splash out Protection | >2" (50 mm) |
| Heater | A rain gauge heater, HT-525, is available where snow or freezing weather may occur. It consists of two low-power heating elements that prevent disruption in readings during freezing times. The heaters are thermostatically controlled. |
| Height | 10.25" |
| Level | Integral Bubble Level |
| Pivot | Ground bronze pivots with hardened stainless steel shaft (default) |
| Resolution | 0.01" English, 0.2 mm (optional) |
| Switch | Momentary potted reed switch |
| Switch Rating | 30 VDC @ 2A, 115 VAC @ 1A |
| Warranty | 3 years |