PCAN-LIN
Gateway for LIN, CAN, and RS-232

PCAN-LIN High-speed CAN
IPEH-002025
PCAN-LIN Low-speed CAN
IPEH-002028
PCAN-LIN High-speed CAN opto-decoupled
IPEH-002029
Description
The PCAN-LIN module enables CAN, LIN, and serial participants to communicate. The module is supplied in a plastic casing and includes firmware which enables data to be exchanged between the different bus systems. Various modes can be set up with the aid of configuration software. Then for instance the module acting as the LIN master can request data and route the incoming LIN data to the CAN bus and/or the serial interface. Data can be routed between CAN and LIN with an ID offset.
Technical Specifications
General-purpose gateway (or router when using Acceptance Code / Acceptance Mask feature) from:
- RS-232 to LIN (and back)
- CAN to LIN (and back)
- RS-232 to CAN (limited bandwidth)
CAN bit rates up to 1 Mbit/sComplies with CAN specifications 2.0 A/BLIN bit rates of 1 – 20 kbit/sTransmitting/receiving LIN 1.x and 2.x framesAvailable for use as LIN master or slaveSimulation of LIN slaves. Data can be changed via CAN frames Processing a user-definable LIN ID list (scheduler with limited number of entries)Individual LIN frames can be initiated via CAN or RS-232Voltage supply from 9 to 30 VExtended operating temperature range
from -40 to 85 °C (-40 to 185 °F)


Optionally available:
- High-speed (ISO 11898-2) or Low-speed (ISO 11898-3) CAN transceiver module
- Galvanic isolation between RS-232 and CAN/LIN up to 1 kV (only for High-speed CAN)
Scope of Supply
- PCAN-LIN in plastic casing
- Configuration and monitoring tool PCAN-LIN Config for Windows 11, 10, 8.1 (32/64-bit)
- Manual in PDF format