Migatron SPC-701
SPC-701
Features
- Analog Input
- Snap Track Mount
- Analog Output
- DC Power In
- One Adjustable Output
- Form C Relay Output
- Feed Through Sensor Excitation Power
- WAGO Press Terminal Blocks
About the SPC-701
Migatron's SPC-701 is an adjustable control with 1 setpoint. The setpoint is independently adjusted, and has a Form C relay output. This control can be used with any sensor or device that produces a 0-20 mA, 4-20 mA, 0-10V or 2-10V analog output. Migatron's SPC-701 will work with all Migatron analog output sensors. Besides the 1 relay output, there is a 0-10V analog output. This output can be used to drive a meter or other analog drive controls. This analog output can feed a Migatron's SPC-701 or SPC-704 to provide additional setpoints. Migatron's SPC-701 also provides 24 VDC excitation power at to drive input sensors. Migatron's SPC-701 has a signal averaging potentiometer that helps alleviate false trips during sudden signal changes.
Migatron's SPC-701 can be mounted on Snap Track, DIN rail (with optional DIN mounting plate. Part #7942742 ) or four studs. The terminal blocks are press to open for easy wiring. There is an easy to view bright LED that show the relay status. Migatron's SPC-701 is powered by 24VDC. There is an isolated feed thru path across the board that can be used as a wiring aid. The relay output can handle up to 3 amps. Power On Status LED.
Specifications
| Input | 24VDC, no sensor 30 mA, with sensor up to 2A |
| Excitation Power | 24VDC up to 2A |
| Analog Input | 0-20 mA, 4-20 mA, 0-10 VDC, 2-10 VDC |
| Signal Input Resistance | (Voltage Input 100K Ohms) (Current Input 250 Ohms) |
| Set Point Range | (0-10 VDC) (0-20mA) |
| Set Point Hysteresis | 1% |
| Signal Averaging | (Voltage Input 0-1s per volt) (Current Input 0-.5s per mA) |
| Analog Output | 0-10VDC with load resistance 1K to infinity |
| Relay Contacts | (Resistive Load, 2A@277AC and 3A@ 30VDC/125VAC) |
| Relay Contacts | (Inductive Load, 1A@125VAC) |
| Relay Switching Min | (Current 10MA) Max (Voltage 30VDC/277VAC) |
| Operating Temperature Range | -25 to 70 C or -13 to 158 F |
| Humidity | 0 to 95% Non-Conducting |
Ordering Information
| Part Number | Description |
|---|---|
| SPC-701 | Set point Controller, 1 Adjustable Output |
| F24-7942742 SPC-701 | DIN Rail Mounting Kit – Sold Separately |
| F24-7942744 | DIN Rail (6” section) – Sold Separately |