Migatron RPS-409A
RPS-409A
Self Contained Ultrasonic Sensors
Narrow Beam Analog Distance Sensor
Features
- Various Sensing Ranges
- Narrow Sensing Beam
- LED Indicator
- Short Circuit Protected
- Temperature Compensation
- Wide Temperature Range
- Sync / Enable 20-30VDC
- Reverse Polarity Protected
- Self Contained Sensor
- Analog Voltage Output
- RPS-409A in PVC Housing
- Chemical Resistance (PVC)
- Quick Disconnect Connector
About the RPS-409A Sensor
Migatron's RPS-409A analog ultrasonic sensor is a self contained sensor in a 30mm PVC barrel housing. It is powered by 20-30VDC with reverse polarity protection. It also has a narrow beam angle which enables it to get into tight places. A flat target can tilt up to 10 degrees and still be detected.
Migatron's RPS-409A has a short circuit protected analog 0-10 VDC output. The output is a linear .125 volts per inch. Example: a target placed 10 inches from the sensor will result in an output signal of 10 volts.
Migatron's RPS-409A has a temperature compensation built in to provide accurate readings throughout the entire operating range.
For set-up purposes an LED indicator is provided. The LED is Green when not detecting and changes to red as a target moves into place. The sensor is completely sealed and connection is made by way of IP and NEMA rated cables.
Besides the input and output lines there is an enable or synchronous line provided. This can be used to fire the sensor at a particular time or for connecting multiple sensors together to prevent crosstalk.
Migatron's RPS-409A is designed to take advantage of today’s PLC and computer analog input cards. The analog card chosen will determine the resolution of the system. The numerical values that are programmed into the PLC or computer will determine the zero and span.
If a set point or set points are required in the application look up the Migatron SPC-701, SPC-704, or M-1000 control products. Both the SPC-704 and M-1000 can also provide excitation power to drive the sensor.
Specifications
| Model | Range | Input Current | Volts/Inch |
|---|---|---|---|
| RPS-409A-40 | 4″ – 40″ | 35mA Typical | 0.250 |
| RPS-409A-80 | 6″ – 80″ | 35mA Typical | 0.125 |
| RPS-409A-144 | 10″ – 144″ | 45mA Typical | 0.069 |
| Power Input | 20 – 30 VDC Reverse Polarity Protected | ||
| Ambient Temperature | -40° to 60°C or -40° to 140°F | ||
| Humidity | 0% – 95% Non -Condensing | ||
| Housing Material | PVC Housing with a PVC sensing face | ||
| Output | Analog Voltage Output 0 to 10 Volts (Load 500 ohms to infinity) Short Circuit Protected | ||
| Model | Transducer Frequency | Response Time | |
| RPS-409A-40 | 175kHz Typical | 25ms Typical | |
| RPS-409A-80 | 135kHz Typical | 25ms Typical | |
| RPS-409A-144 | 70kHz Typical | 75ms Typical | |
| Weight | Sensor only 4 ounces Sensor plus cable shipping weight 9 ounces | ||
| Enclosure | Rating IP65 (NEMA 4), Rating IP67 (NEMA6P) Depending on cable selection. |
Ordering Information
| Part Number | Range | Output |
|---|---|---|
| RPS-409A-40 | 4″ – 40″ | 0 – 10VDC Analog |
| RPS-409A-80 | 6″ – 80″ | 0 – 10VDC Analog |
| RPS-409A-144 | 10″ – 144″ | 0 – 10VDC Analog |
| F32-5070053 | 2 meter QD Cable, Pico 4-Pin Locking – Sold Separately | |
| F32-5070094 | 2 meter QD Cable, Pico 4-Pin 90° Locking – Sold Separately | |
| PD6000 | Digital Meter with 4 Relays |