Migatron RPS-412A
RPS-412A
High Accuracy Ultrasonic Sensor
Features
- High Accuracy Ultrasonic Sensor
- Input Voltage 20-30 VDC
- Analog Current Output
- Analog Voltage Output
- Short Circuit Protected
- Wide Temperature Range
- Temperature Compensation
- Self Contained Sensor
- Quick Disconnect Connector
- Stainless Steel Housing
About the RPS-412A
Migatron's RPS-412A is a high accuracy analog ultrasonic sensor (±0.002″ or 0.05% of range, which ever is greater, at 25°C) with a resolution of 0.0005″. The sensor monitors and compensates for air temperature 50 times per second, using the temperature compensation bar located in front of the transducer. The RPS-412A comes in two versions, analog current output or analog voltage output.
Migatron's RPS-412A is designed to take advantage of today’s PLC and computer analog input cards. The analog input card will determine the resolution of the system. The analog-to-digital conversion should have, at least, 14 bit resolution. The numerical values programmed into the PLC or computer will determine the zero and span.
Specifications
| Model | Range | Input Current |
|---|---|---|
| RPS-412A-10-A | 3″ – 10″ | 2.286 mA per Inch |
| RPS-412A-10-V | 3″ – 10″ | 1.000 V per Inch |
| RPS-412A-16-A | 3″ – 16″ | 1.231 mA per Inch |
| RPS-412A-16-V | 3″ – 16″ | 0.625 V per Inch |
| Accuracy | ±0.002″, or ±0.05% of range (which ever is greater) @ 25°C±0.2% of range from 0 – 50°C |
| Resolution | 0.0005″ |
| Power Input | 65mA Typical |
| Operating Temperature | 0 – 50°C or 32 – 122°F |
| Humidity | 0% -95% Non-Condensing |
| Output | Analog Voltage Output, Load 500 Ohms to Infinity, Short Circuit ProtectedAnalog Current Output, Load 0 Ohms to 500 Ohms Maximum, Short Circuit Protected |
| Transducer Frequency | 60kHz |
| Housing | Stainless Steel |
| Protection | IP10 |
| Sample Rate | 20ms Typical |
| Update Time | 2s Maximum |
| Weight | 22 Ounces |
Ordering Information
| Part Number | Range | Output |
|---|---|---|
| RPS-412A-10-A | 3 – 10″ | 4 – 20mA Analog Current Output – Cable Sold Separately |
| RPS-412A-10-V | 3 – 10″ | 0 – 10VDC Analog Voltage Output – Cable Sold Separately |
| RPS-412A-16-A | 3 – 16″ | 4 – 20mA Analog Current Output – Cable Sold Separately |
| RPS-412A-16-V | 3 – 16″ | 0 – 10VDC Analog Voltage Output – Cable Sold Separately |
| F32-5001300 | 2 meter QD Cable, M12 5-Pin 22 AWG Shielded |