Migatron RPS-150A
RPS-150A
Wide Beam Ultrasonic Sensor
Analog Proximity Sensor Max Range: 80 Inches
Features
- Adjustable Zero & Span
- Broad Sensing Beam
- Range 2 to 40″ or 5 to 80″
- LED Strength Indicator
- Analog Current & Voltage Outputs
- Selectable Inverted & Non-Inverted Outputs
- Short Circuit & Reverse Polarity Protected
- Limit Switch Style Housing
About the RPS-150A
Migatron's RPS-150A analog ultrasonic sensor is mounted in a limit switch style housing and is completely self contained. It is powered by 20-30VDC, and is reverse polarity protected. It also has a wide beam angle which enables it to detect a target that is not at right angles. A flat target can tilt up to 35 degrees and still be detected. The RPS-150A has 2 short circuit protected analog outputs, 4-20mA and 0-10VDC. These outputs can easily be inverted and can be scaled over almost any range by means of adjusting the zero & span control. For set-up purposes an LED signal strength indicator is provided. Migatron's RPS-150A ultrasonic sensors can be used as level control devices for liquid level and bulk materials.
This LED is green when not detecting and fades to RED as a target moves into place, depending on how much reflected signal is coming back from the target. The frequency of operation is 38.5kHz. There are two ranges available in this model 2″ to 40″ or 5″ to 80″. It also features a quick disconnect (QD) receptacle. The housing is constructed of PBT plastic and has standard 30mm x 60mm limit switch mounting dimensions as well as side holes for mounting the sensor on its side.
Specifications
| Operational Range | Adjustable 2″ to 40″ Adjustable 5″ to 80″ |
| Power Input | 2 – 30VDC Reverse Polarity Protected |
| Input Current | 50 mA VDC |
| Ambient Temperature | 0 to 60°C or 32 to 140°F |
| Humidity | 0% -95% Non-Condensing |
| Housing | PBT Plastic, Limit Switch Style |
| Outputs | Current Soucing Analog Output 4 – 20 mA Inverted & Non-Inverted Load 0 Ohms to 500 Ohms Analog Voltage Ouput 0 – 10 volts Inverted & Non-Inverted Load 500 Ohms to Infinity Short Circuit Protected |
| Transducer Frequency | 38.5kHz |
| Response Time | 40″ Model – 22ms 80″ Model – 52ms |
| Weight | 9.5 ounces |
Ordering Information
| Part Number | Range | Output |
|---|---|---|
| RPS-150A-40 | 2″ – 40″ | 0 – 10VDC and 4 – 20mA Analog – Cable Sold Separately |
| RPS-150A-80 | 5″ – 80″ | 0 – 10VDC and 4 – 20mA Analog – Cable Sold Separately |
| F32-5001183 | 2 meter QD Cable, M12 4-Pin 22AWG | |
| F32-5001186 | 5 meter QD Cable, M12 4-Pin 22AWG | |
| PD6000 | Digital Meter with 4 Relays |