Migatron RPS-150
RPS-150
Wide Beam Ultrasonic Sensor
Proximity & Level Sensor Max Range: 80 Inches
Features
- Adjustable Sensing Range
- Broad Sensing Beam
- Range: 2 to 40″, or 5 to 80″
- LED Indicator
- Adjustable Hysteresis
- 105-130VAC or 20-30VDC Power
- Isolated N.O. & N.C. Solid State Relays
- Limit Switch Style Housing
About the RPS-150 Sensor
Migatron's RPS-150 family of self-contained, wide beam angle, ultrasonic sensors can be used as proximity sensors or level sensors. The advantage of this sensor is that the target does not have to be at right angles with the sensor in order to be detected. A flat target can tilt up to 35 degrees and still be detected. For set-up purposes an LED indicator is provided. When in the non-detect state the LED is Green and when in the detect state the LED is Red. Migatron's RPS-150 can be operated in two modes: a proximity and a hysteresis mode.
The frequency of operation is 38.5kHz. There are two ranges available in this model: 2″ to 40″ or 5″ to 80″. The sensor is available with a 120VAC power input or a 20 – 30VDC input. It also features a quick disconnect (QD) receptacle. The housing is constructed of PBT plastic and has standard 30mm x 60mm limit switch mounting dimensions, as well as side holes for mounting the sensor on its side. The output consists of two solid state relays N.O. & N.C., and can switch 2 – 130VAC or VDC up to 100mA DC or 50mA AC continuous. The relay outputs are short circuit protected and isolated up to 1500VRMS.
Specifications
| Operational Range | 40″ Models – Adjustable 2″ to 40″ 80″ Models – Adjustable 5″ to 80″ |
| Hysteresis | 40″ Models – Adjustable 0.5″ to 40″ 80″ Models – Adjustable 1″ to 80″ |
| Power Input | AC Models – 105 to 130VAC DC Models – 20 to 30VDC |
| Input Current | 15 mA VAC or 35 mA VDC |
| Ambient Temperature | 0 to 60°C or 32 to 140°F |
| Humidity | 0% -95% Non-Condensing |
| Housing | PBT Plastic, Limit Switch Style |
| Outputs | 2 Solid State Relays N.O. & N.C. Isolated 1500VRMS 2 to 130VAC or VDC 100 mA DC or 50mA AC Continuous Short Circuit Protected |
| Transducer Frequency | 38.5kHz |
| Response Time | 40″ Models – On = 60ms & Off = 60ms 80″ Models – On = 120ms & Off = 120ms |
| Weight | 9.5 ounces |
| Accuracy | 0.187″ or 0.5% (0.005) of the range, whichever is greater at 70°F. |
Ordering Information
| Part Number | Range | Output |
|---|---|---|
| RPS-150AC-40 | 2″ – 40″ | 2 Solid State Relays N.O. & N.C. – Cable Sold Separately |
| RPS-150AC-80 | 5″ – 80″ | 2 Solid State Relays N.O. & N.C. – Cable Sold Separately |
| RPS-150DC-40 | 2″ – 40″ | 2 Solid State Relays N.O. & N.C. – Cable Sold Separately |
| RPS-150DC-80 | 5″ – 80″ | 2 Solid State Relays N.O. & N.C. – Cable Sold Separately |
| F32-5001162 | 2 meter QD Cable, 1/2″-20 5-Pin 22 AWG | |
| F32-5001164 | 6 meter QD Cable, 1/2″-20 5-Pin 22 AWG |