Ixxat CAN-CR210/FO (F-SMA)
CAN repeater with fiber optics (F-SMA) and backbone bus
Ixxat CAN-CR210/FO
Item Number: 1.01.0068.45010
Ixxat CAN-CR210/FO repeater with two CAN interfaces, one of which is a Fiber Optics interface (FSMA plug), enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated CAN backbone interface.
Application Sample
Fiber optic CAN repeaters enable the bridging of interference-intensive routes using optical lines. They enable complete galvanic decoupling of segments and offer high protection against overvoltage.
Features and benefits
Robust Industrial Use
Designed for industrial environments, meeting high demands for robustness, temperature ranges, and safety.
Flexibility in CAN Network Design
Helps to optimize CAN network structures by enabling extended layouts (stub lines, star and tree topologies).
Fast and Transparent Operation
Minimal impact on real-time behavior, equivalent to a short line length (ca. 60 m/ 300 ns delay). Enabling transparent transmission, compatible with all higher layer protocols.
Cost Saving Due to Simple Wiring
Optimized topologies enable simpler wiring, resulting in less cables and cost savings at installation and maintenance.
Enhanced Network Reliability
Higher system reliability by electrically isolating CAN segments and power up to 1 kV. This enhances the protection of the device against damage to electronics caused by voltage peaks.
Backbone Bus for Simplified Network Expansion
To achieve tree or star topologies, multiple repeaters can be easily connected in series through the integrated backbone bus.
Integrated Bus Termination Resistors
Integrated bus termination resistors (120 Ohm, switchable via DIP switch) prevent reflections on the line ends and ensure optimum communication.
Technical Specifications
| General | |
| Content of Delivery | CAN repeater, user manual |
| Net Width (mm) | 100 mm |
| Net Height (mm) | 120 mm |
| Net Depth (mm) | 22.5 mm |
| Net Weight (g) | 122 g |
| Packed Width (mm) | 14 mm |
| Packed Height (mm) | 4 mm |
| Packed Depth (mm) | 18 mm |
| Packed Weight (g) | 203 g |
| Mounting | DIN rail mount (bracket included) |
| Current Consumption Type Value at Vcc Nom (mA) | 62 |
| Current Consumption Max value at Vcc nom (mA) | 100 |
| Input Voltage (V) | +9 V to +32 V DC |
| Isolation | 1 kV DC for 1 sec. |
| Operating Temperature °C Min | -20 °C |
| Operating Temperature °C Max | 70 °C |
| Storage Temperature °C Min | -40 °C |
| Storage Temperature °C Max | 85 °C |
| Relative Humidity | 10 to 95 %, non-condensing |
| Housing Materials | Polyamide housing for top hat rail mounting |
| Packaging Material | Cardboard |
| Warranty (years) | 1 |
| Identification & Status | |
| Item Number | 1.01.0068.45010 |
| Export Control Classification Number (ECCN) | EAR99 |
| Dual Usage | No |
| Country of Origin | Germany |
| Brand | Ixxat |
| HS Code | 8517620000 |
| Certifications & Standards | |
| CE | Yes |
| FCC | Yes |
| WEEE Category | IT and telecommunications equipment |
| Protection Class IP | IP30 |
| ETIM Classification | EC000698 |
| CAN Features | |
| CAN Mode | CAN high-speed (ISO 11898-2) with CAN choke |
| CAN Baud Rate | Up to 1 Mbit/s |
| CAN Transceiver | TI SN65HVD251 |
| Physical Features | |
| Fiber Optic Line Specification | Multi mode fiber optic cables (only glass); Recommended: 50/125 μm, 62.5/125 μm, also compatible with: 100/140 μm, 200 μm (consider max. line length) |
| Connectors / Input / Output | 1 x D-Sub 9 connector, 1 x backbone bus, 2 x F-SMA connector, 1 x power connector |
| Contains Battery | No |