WATER QUALITY SENSORS
Water quality transmitters monitor Temperature, pH, Conductivity, Dissolved Oxygen, and ORP/Redox
FEATURES:
- Fully encapsulated electronics
- 4-20 mA output
- Marine grade cable with strain relief
- Stainless steel housing
Water Quality Sensors Product Description
Global Water’s Water Quality Sensors are rugged, industrial grade sensors designed for direct immersion or insertion into water streams. Most water quality sensors are powered by 10 to 36 VDC and all water quality sensors have a linear 4-20mA output. 25 ft cable lengths are standard, with optional cable lengths to 500 ft.
Output: 4-20 mA
Range: -50°C to +50°C
Accuracy: ±0.2°F or ±0.1°C
Maximum Pressure: 0-200 PSI
Operating Voltage: 10-36 VDC
Current Draw: Same as sensor output
Warm Up Time: 5 seconds minimum
Operating Temperature: -50° to +100°C
Size of Probe: 3/4″ diameter x 4 1/2″ long
Weight: 1/2 lb.
Output: 4-20 mA
Range: 0-14 pH
Accuracy: 2% of full scale
Maximum Pressure: 40 PSI
Operating Voltage: 10-30 VDC
Current Draw: 5.5 mA plus sensor output
Warm Up Time: 3 seconds minimum
Operating Temperature: -5° to +55°C
Size of Probe: 1 1/4″ diameter x 10″ long
Weight: 1 lb.
Output: Dual 4-20 mA (Conductivity and Temperature)
Conductivity Range: 0-200 uS/cm, 200-2000 uS/cm, 2-20 mS/cm, 20-200 mS/cm, and 200-2000 mS/cm
Conductivity Accuracy: +0.5% of reading
Temperature Compensation: automatic (2%/°C normalized to 25°C)
Maximum Pressure: 35 psi (82 ft (25m))
Operating Voltage: 10-36 VDC
Current Draw: 20 mA plus sum of both sensor outputs
Warm Up Time: 3 seconds minimum
Operating Temperature: 23 to +158°F (-5 to +70°C)
Dimensions: 8 inch L x 0.86 inch Diameter (202 mm L x 22 cm Dia.)
Weight: 8 oz (227 g) plus cable
Output: 4-20 mA
Range: 0-100% Saturation, 0-8 ppm, temperature compensated to 25°C
Accuracy: ±0.5% of full scale
Maximum Pressure: 40 PSI
Operating Voltage: 10-36 VDC
Current Draw: 15.5 mA plus sensor output
Warm Up Time: 10 seconds minimum
Operating Temperature: -40° to +55°C
Size of Probe: 1 1/4″ diameter x 11″ long
Weight: 1 lb.
Membrane: 0.001 FEP Teflon (standard)
Combined Error: 2% FS
WQ-FDO OPTICAL DISSOLVED OXYGEN SENSOR
Output: Dual 4-20 mA (Partial Pressure and Temperature)
Partial pressure range: 0-400 mbar
Accuracy: ± 0.5 % of value
Maximum Pressure: 35 PSI (25m/82ft water depth)
Operating Voltage: 10-30 VDC
Current Draw: 24 mA plus both sensor outputs
Warm Up Time: 6 seconds minimum, 8 recommended
Operating Temperature: 32 to +122°F (0 to +50°C)
Size of sensor: 8 inch L x 0.86 inch Diameter (202 mm L x 22 cm Dia.)
Sensor Construction: Acetyl, stainless steel, cast epoxy
Weight: 8 oz (227 g) plus cable
Output: 4-20 mA
Range: -500 to +500mV
Accuracy: 2% of full scale
Maximum Pressure: 40 PSI
Operating Voltage: 10-36VDC
Current Draw: 0.2 mA plus sensor output
Warm Up Time: 3 seconds minimum
Operating Temperature: -40° to +55°C
Size: 1″ diameter x 10 1/2″ long
Weight: 1 lb.
Water Quality Sensors Options
WQ101 Water Temperature Sensor (PN# DA0000)
WQ-Cond Conductivity Sensor (PN# DCA500)
4-20mA output. Includes 25 ft of cable.
WQ401 Dissolved Oxygen Sensor (PN# DD0000)
WQ-FDO Optical Dissolved Oxygen Transmitter
Includes 25 ft of cable. (PN# DD0500)
WQ600 ORP/Redox Sensor (PN# DE0000)
WQEXC Extra Cable (PN# DH0000)
Standard water quality sensors include 25 ft of cable, but can be purchased with up to 500 ft of cable.
RELATED PRODUCTS
EBI 100-T101 Temperature Data Logger (PN# 1340-6501)
WQMS Water Quality Monitoring System
The standard unit includes a datalogger, temperature sensor, pH sensor, conductivity sensor (with a 0-5000µS range unless otherwise specified), and DO sensor. (PN# DP0000)
PHT-810 pH Tester (PN# 1340-5810)
BlueLine Gel Filled pH Electrodes (PN# Varies)
Robust gel filled pH electrodes for basic pH measurements.
BlueLine Refillable pH Electrodes (PN# Varies)
Robust refillable pH electrodes for basic pH measurements.
IoLine Tris Compatible pH Electrodes (PN# Varies)
Tris compatible glass pH electrodes without integrated temperature sensor for demanding pH measurements.
IoLine High Performance pH Electrodes (PN# Varies)
High performance glass pH electrodes for demanding pH measurements.
2AA112 pH 3110 Portable Field pH meter w/case & accessories
ProLab 1000 Bench top pH meter
ProLab 3000 Laboratory pH meter
inoLab® 7110 wastewater pH meter
WQL-pH pH Datalogger
Included: pH datalogger, PC-program WQL-Log, USB cable, Li battery, shackle, and hex wrench.
EC30A Conductivity Tester (PN# 606EC30)
Includes meter and conductivity cell, batteries, and instruction manual.
EC300ACC Field Conductivity Meter Kit
Includes field conductivity meter, cable with attached conductivity/temperature probe, and hard sided case.
EC500 Pocket Waterproof pH/Conductivity Tester (PN# DR0500)
Includes electrode, protective sensor cap, sample cup with cap, four 1.5V SR44W batteries, and a 48 inch (1.2m) neckstrap.
EC510 Pocket Waterproof pH/Conductivity Tester Kit (PN# DK0510)
Includes an EC500 portable conductivity meter with sensor, 84uS, 1413uS, 12880uS calibration standards, pH buffer pouches (1 each of 4, 7, 10pH plus rinse solution), weighted base, protective sensor cap, 3 sample cups, four 1.5V SR44W batteries, carrying case, and a 48 inch (1.2m) neckstrap.
2CA102 Cond 3110 Set Handheld Conductivity Meter Set
Includes meter, TetraCon 325-3 probe, case & accessories.
Lab 960 Benchtop Conductivity Meter
3C30-010 Cond 1970i Portable Conductivity Meter
Conductivity meter with universal AC power supply.
WQL-Cond Conductivity Datalogger
Conductivity datalogger for remote monitoring.
Conductivity Electrodes
Conductivity electrodes for various applications.
DO600 Dissolved Oxygen Meter (PN# BK0600)
DO610 Dissolved Oxygen Probe Kit (PN# DK0610)
Measure 6 water quality parameters.
DO200ACC Field Dissolved Oxygen Meter Kit
Includes field DO meter, cable with attached DO/temperature probe, and hard sided case.
2BA103 Oxi 3205 Set Handheld Dissolved Oxygen Meter Set
Includes dissolved oxygen meter, DurOx® 325-3 dissolved oxygen probe (9.8ft cable), case & accessories.
3B30-010 Oxi 1970i Portable Dissolved Oxygen Meter w/universal power supply
ORP15A Handheld ORP Meter (PN# 606ORP15)
CL200 Chlorine Meter (PN# DK0200)
Includes sample cup with cap, 5pks of 10 reagent tablets, batteries, and a 48 inch neckstrap.
EX900 Water Quality Meter Kit (PN# DK0900)
Includes the water quality meter, chlorine probe, gel filled pH electrode, ORP electrode, protective sensor cap, 5 packs of 10 reagent tablets (50 tests), 5 plastic sample cups, weighted stand, pH 4, 7 & 10 buffer packs, four LR44 button batteries, carrying case, and a 48 inch neckstrap.
600326 Turb 430T Portable Turbidity Meter Kit (EPA)
Includes calibration kit (0.02 – 10 – 1000), 2 empty cuvettes, cleaning tissues, batteries (4 x AA), and field case with table insert.
WQ730 Turbidity Sensor (PN# DFJ000)
WQ770-B Turbidity Meter (PN# DG0200)
CODPlus Portable Colorimeter (120V/60Hz)
Includes 4 sample tubes, COD adapter, and AC adapter. (PN# DL1922)
251100 pHotoFlex Portable Photometer
LED filter portable photometer with integrated pH functions for field use. Portable Photometer only, no electrodes.
250201 photoLab 6100 (VIS) portable spectrophotometer
Includes case, meter, and 12V car adapter cable.
3F30-110 Multi 1970i Portable Multi-parameter Meter
Multiparameter meter with universal AC power supply. Probes not included.
2F30-104B22 Multi 3400i Kit Multi-parameter Meter
Includes Multi 3400i, SenTix® 41-3 pH electrode, CellOx 325-3 oxygen electrode, TetraCon 325-3 conductivity sensor, technical buffers 4 and 7, 3 M KCl, cleaning solution, 3 exch. membr. heads, electrolyte, abrasive foil, cond standard (1413 µS/cm) All sensors have 9.8 ft (3 m) of cable.
2F40-114B0E Multi 3500i Kit Handheld Multiparameter Meter
Includes Multi 3500i, SenTix® 41-3 pH electrode, ConOx-3 conductivity/oxygen electrode, PC comm. pkg, case & acc.. All sensors have 9.8 ft (3 m) of cable.
ProLab 4000 Multiparameter Benchtop Meter
Pro Plus Multiparameter Water Quality Meter
Handheld multiparameter water quality meter for field measurements.
600XL Water Quality Analyzer
Water quality instrumentation for simultaneously measuring up to ten different parameters.
6820 V2 Water Quality Sonde
Water quality instrumentation for measuring up to 17 different parameters.
WQ900 Water Quality Testing Kit
Constituent testing kit for water quality. (PN# DJ0000)
PC320 Water Quality Controller
SIT65 Water Quality Telemetry System (PN# FM1000)
CR500 Circular Chart Recorder
Circular chart recorder with multiple pen input and relay output options.
EZ100 Water Quality Sensor Display
LCD readout display for both portable use and permanent installations. (PN# GA0000)
