WQS Water Quality Sampling System

WQS Water Quality Sampling System

YSI's Water Quality Sampler System includes a rugged sampler with a peristaltic pump and a 2-gallon polyethylene sample bottle. The system features a display showing sensor data, relay states, and programmable threshold levels for alarms or sampling triggers. The data recorder logs water quality readings and sample times, with easy access to data via PC software.

Specifications

Composite Water Sampler
Sample Size15 composite sample sizes from 50ml to 2 liters plus a Full Bottle discrete setting (Approximate sizes at 4 foot head)
Operating Temperature32° to +158°F (0° to +70°C)
MaterialsEnclosure: Expanded UV protected PVC
Bottle: 2.5 gallon Polyethylene
Pickup Hose: 15 ft (4.6 m) reinforced PVC 1/4 inch ID polyethylene flexible tubing section with intake strainer
Pump Tubing: Norprene 1/4 inch ID, 7/16 inch OD
Sample PumpFlow Rate: 1000 ml per minute at a 4 foot head
Type: Peristaltic
Maximum Lift: ~20 feet (6 m)
BatteryRechargeable 5 AH Gel Cell
Battery Life~1 hour, continuous pumping under load
Standby3 months while still retaining enough power to run the pump to capacity
Water Quality Sampler System Controller
Sensor Types/UnitsLevel (Feet, Inches, Meters, Centimeters, Custom), Temperature (°F, °C, Custom), pH (ph, Custom), Conductivity (uS, mS, Custom), Dissolved Oxygen (%, mbar, ppm, mg/L, Custom), ORP (mV, Custom), Turbidity (NTU, Custom), Wind Speed (MPH, KPH, Ft/Sec, M/Sec, Custom), Wind Direction (°, Custom), Humidity (%, Custom), Solar Radiation (W/M², Custom), Pressure (mbar, hPa, inHg, PSI, Pa, Custom), Custom (Custom)
Display/Keypad16 Character x 2 Line Backlit LCD, 8-Button Tactile Keypad
Sensor Resolution7 Digit Maximum, Auto-Floating point
AccuracySensor Accuracy + 0.1% + 1 Digit
Analog Sensor Input2-Wire or 3-wire, 4-20mA, 0-5VDC, 0-1VDC
Analog Output4-20mA Scalable
Output Relays4 Independent SPDT Relays
Contact Rating8A @ 250VAC, 5A @ 30VDC Resistive
PowerVoltage: 12VDC or 18-24VDC Input, +/-10%
Supply Current: 13mA + Sensor Current + Backlight + 4-20mA Output
Water Quality Sampler Data Recorder
NOTEWQS100 does not include datalogger
MemoryNon-volatile flash memory
Power12VDC rechargeable battery
Standby Current70uA Typical
Logging Current5mA Typical
Analog Sensor Inputs4-20mA
Resolution: 12-Bit, 4096 Steps
Sensor Warm-up Time: Programmable, 0-60 Sec
WQS200: Water quality sensor + relay state + battery voltage monitor
WQS300: Water quality sensor + relay state + battery voltage monitor + 5 extra input channels
Digital InputsMaximum Input Voltage: 24VDC
Maximum Frequency: 100Hz
Minimum Pulse Width: 2mS
Maximum Count: 65,535 (16-Bit)
WQS200: None
WQS300: 2
Sample Now InputSample-on-Demand input, software enabled (WQS300 only)
Maximum Input Voltage: 24VDC
Minimum Pulse Width: 2mS
Sample ModesFixed Interval Programmable from 1 Sec. to >1 Year
High Speed 10 Samples per second
Logarithmic Sample Rate (Approximation)
Exception (Log only on deviation from previous reading)
Storage CapacityWQS200: 81,759 Recordings for all inputs plus time stamp
WQS300: 40,879 Recordings for all inputs plus time
Data Overwrite: Select memory wrap or unwrap (unwrap will stop logging data once memory is full)
Communication PortsWQS200: USB Type B connector
WQS300: RS-232 DB9 or USB Type B
Selectable Baud Rates: 9600, 19200, 28800, 38400, 57600, 115200
ClockSynchronizes to the time and date of user's computer
Operating TemperatureIndustrial, -40 to +185°F (-40 to +85°C) (Battery may not apply)
Data Logger Software
Compatible with Microsoft's Windows 98, ME, 2000, NT, XP, Vista, and 7
Windows and Excel are trademarks of the Microsoft Corporation
Tabular Display/Printout
Data in standard spreadsheet format (.CSV)
Programmable alarm start and stop times
Field calibration software and help files included
Mechanical
Enclosure22x17x9 inch (56x43x23 cm) (HxWxD)
Weight21.5 lb (9.75 kg)