Bitumen Testing Instruments
Bulk Density Cylindrical Metal Measure
Model Number: TM-019-20L-ISI, DENSITY BUCKET 20 LTR
Particle Charge Tester (ASTM D244) With Accessories
Model Number: EIE-BE-110
Compliance Standards: EN 1430, ASTM D244
Applications: Used to determine the particle charge of Bitumen Emulsion.
Apparatus Details: The equipment comprises of following items
- Digital Milliammeter scale up to 10 mA in front facing control panel
- In built variable resistor circuit
- Beaker 250 ml
- Two stainless steel electrodes
- Insulating device
- Glass rod
- Dimensions : 200 x 200 x 600mm
- Overall Dimensions: 700 X 350 X 240(L X W X D) mm
- Ammeter: 0.1 amp
- Power Supply: 250 Volts, 1ph, 50/60Hz
- Weight: 6 kg approximately
Length Gauge
Model Number: TM-104-ISI
Used to determine the Elongation Index of the Aggregate. Aggregate particles are considered elongated when their length is more than 1.8 of the nominal size. It consists of a hard wooden base with vertically mounted metal studs as specified in the IS.
Storage Plate for 4 Inches DIA Marshal Specimen
Model Number: TM-041-6
Compliance Standards
Details
- To store 6 pieces of Marshall Specimen
- Specimen dia : 100 mm (4")
- Plate Material : Mild Steel
Standard Penetrometer for Bitumen - Manual Control With Geared Height Adjustment and Dial Gauge ASTM D5
Model Number: TM-044MF
As per IS 1203. Basic Model with fine adjustment facility for ease of precise setting.. As per IS 1203. The apparatus consist of a cast aluminum base with an iron stand on which moves an aluminium arm. A 6" dial is fixed on this arm and a brass chromium plated rod slide through the lower portion of the arm. A needle with weights is fitted to this rod. The dial is graduated from 0‑400 in one tenth millimeter sub division. Supplied complete with adjustable needle holder, penetration needle, sample container, transfer dish and weight of 50 gm. Digital stop watch is essential to perform the test at extra cost. Model with Automatic controller and fine adjustment facility also available.
- Overall Dimensions in Inches (L x W x H): 9 x 11 x 21
- Weight (Approx.): 6.7KG
Digital Ring and Ball Apparatus (Programmable) ASTM D36
Model Number: TM-043PD
Also called Softening Point Apparatus. This apparatus is meant for determination of softening point of bituminous materials according to listed ASTM & IP Standards. Compliance with Following International Standards EN 1427 | ASTM D36 | AASHTO T53 | IP 58 | IS 1205. In addition to regular accessories, a Digital Programmable temp.controller is fitted to the unit to ensure rise of temperature at 5° C as per the guidelines of ASTM/ISO/AASTHO/IS Standards. FULLY Automatic Model also available for Research application.
- Overall Dimensions in Inches (L x W x H): 8 x 10 x 6.5
- Weight (Approx.): 3.5KG
Apparatus for Distillation of Emulsified Asphalt With Ring Burner ASTM D244, ASTM D6997
Model Number: EIE-BE-108
The distillation of emulsified asphalt is performed to determine the water and residual asphalt content of emulsified asphalts. The process separates water from asphalt by applying heat and measuring the residue. Complies with ASTM D244, ASTM D6997, AASTHO T59.
Roller Mixer
- Roller Size: 4 nos. x 230 mm long
- Input: 230 V, 50Hz - 110 V, 60 Hz, AC
- RPM: 30 RPM / 36 RPM
- Mixing Time: 15 to 20 Minutes
- Weight: 3 Kg
Marshall Mould - Standard (4" DIA)
Model Number: TM-041-1S
Compliance Standards: ASTM D1559, AASHTO T245, EN 12697-10, ASTM D6926
Technical Specifications:
- Used to produce the Marshall specimens with automatic or manual compactors
- Manufactured from seamless steel
- Powder coated to prevent corrosion
- Mould consists of Mould body, collar and Base plate
- Size : 101.6mm Dia x 76.2mm Height
- Overall Dimensions in Inches (L x W x H): 5 x 5 x 6.5
- Weight (Approx.): 3.150 Kg
Marshall Mould - Modified (6" DIA)
Model Number: TM-041-1M
Complete with Base plate and collar
Compliance Standards: ASTM D5581
- Overall Dimensions in Inches (L x W x H): 7 x 7 x 8
- Weight (Approx.): 6.150 Kg
Marshal Rammer - Standard (4.57 KG)
Model Number: TM-041-5S
Compliance Standards: ASTM D6927, ASTM D1559, BS 598-197
Details: The compaction hammer will have a flat, circular tamping face & a 4.5 kg (10 lbs) sliding weight with a free fall of 457.2 ± 2.5 mm. (18 inch.).
- Overall Dimensions in Inches (L x W x H): 4 x 4 x 37
- Weight (Approx.): 8 Kg
Saybolt Viscometer with Energy Regualtor For Emulsified Bitumen Test
Model Number: TM-048E
Complies with International Standards: IS:3117-2019/ ASTM D88, AASHTO T72
As per ASTM D 88/IS 3117-2019. The apparatus consists of stainless steel bath with oil cup which is centrally placed in a water bath. The bath has a lid which contains a water cooling tube, two handles with two stirring blades, thermometer socket and a straight heater. Stirring is done by turntable arrangement. Supplied without strainer, withdrawal tube, Glass Thermometers and glass wares.
- Overall Dimensions: 280 X 220 X 480(L X W X D) mm
- Weight (Approx.): 3.250 Kg
Dean and Stark Apparatus for Bitumen - IS 1211
Model Number: EIE-BT-1021
Compliance Standards: IS 1211, ASTM D2448, IP 291
Dean & Stark Apparatus for estimation of moisture in Tar & Bitumen.with 10 ml receiver .The apparatus consist of 500 ml heat resistant glass with neck having ground glass joint, a condenser made of heat resistant glass as per fig. 2 of IS 1211, receiver - also made of heat resistant glass with ground glass joint leading to the flask and graduated tube. Capacity of receiver will be 2 or 10 ml. Supplied with Heater.
Asphalt Recovery Apparatus By Abson Method ASTM D1856
Model Number: EIE-BT-109
Compliance Standards: ASTM D1856, AASHTO T170, AASHTO R59
Application: Used for recovering the asphalt (bitumen) from a solution of a previous extraction. The asphalt is recovered with properties substantially the same as those it possessed in the bituminous mixture and in quantities sufficient for further testing.
- Overall Dimensions: 8" x 8" x 26" ( W X H X L)
- Weight: 8 Kg
Apparatus for Determination of Residue on Evaporation - IS 8887
Model Number: EIE-BE-103
Compliance Standards: IS 8887
Consists of Following parts and accessories.
- 2 nos. 1000 ml low from glass beakers
- 2 nos. glass rods 6.5 ± 0.5 mm x 175 ± mm
Note : Electronic balance and Hot air oven, which shall be procured at extra cost, are essential to conduct the complete test, .
Apparatus For Stability to Mixing with Cement - IS 8887, Annex-G
Model Number: EIE-BE-104
Compliance Standards: IS 8887-2018, ANNEX-G
Consists of following parts and accessories.
- Sieve :‑ 1.4 mm. IS sieve approximately 100 mm in diameter and 40 mm in height
- 150 micron IS sieve ‑ 200 mm in diameter.
- Metal dish :‑ A round bottomed metal utensil of about 500 ml capacity.
- Steel rod ‑ rounded ends 13 mm in diameter
- Cylinder 100 ml. cap.
- Shallow pan‑100 mm diameter/50 ml capacity.
Supplied without Electronic weighing Balance and Hot Air Oven which are essential to carry out the test
Apparatus for Coating Ability and Water Resistance - IS 8887:2018 (Annex F)
Model Number: EIE-BE-107
Compliance Standards: IS 8887:2018 (Annex F)
- Mixing pan :‑ A whole enameled kitchen pan with handle of approximately 3 liter capacity
- Mixing Blade :‑ A putty knife with a 30 mm X 90 mm steel blade with rounded corners.
- Sieve :‑ standard of 19mm and 4.75 mm .
- Constant Head water spraying apparatus an apparatus for applying tap water in a spray under a constant head of 775 mm
- Thermometer ‑ Range : ‑ 2°C to 80°C
- Pipette 10 ml capacity
- Calcium carbonate ‑ 500 gm
Note : NABL Calibration for test sieves, Pipette and Glass Thermometer can be provided.
Apparatus for Determination of Storage Stability IS 8887, ASTM D6930
Model Number: EIE-BE-101
Compliance Standards: IS-8887-2018 Annex-D, ASTM D6930
Purpose: Used to determine the Storage Stability
Apparatus Details:
Consisting of following parts and accessories
- 500 ml Measuring cylinder, 50 ± 5mm O.D, having 5 ml graduation with glass stopper : 03 Nos
- 60 ml siphon glass tube pipette : 02 Nos
- 600 ml capacity glass beaker : 04 Nos
- 1000 ml capacity glass beakers : 04 Nos
- Glass rods 6.5 ± 0.5mm x 175 ± 5mm : 01 Nos
- Thermostatically Controlled Storage Cabinet: Capable of maintaining 25°C ± 1°C. Oven, Analytical Balance available at extra cost
Marshal Steel Block - 102MM Dia x 50MM Height - For Heating The compaction Hammer Foot
Model Number: TM-041-4
Compliance Standards: ASTM D6927, ASTM D1559, BS 598, EN 12697-30
Applications:
- For heating the compaction hammer foot.
- Weight : 3 Kgs
- Dimensions : 102 mm dia x 50 mm height
Direct Reading Digital Penetrometer - For Bitumen
Model Number: TM-044DTDPGB
Compliance with following International Standards: IS 1203, ASTM D5
Silent Features:
- Compact design and rugged construction ensures long service life & facilitates transport for Laboratory field applications.
- Powder coated body parts for aesthetical outer appearance
- Sturdy cast iron base provides excellent support.
- Built‑in spirit level and leveling screws ensure proper alignment during testing.
- Supplied with digital indicator to display penetration value and Digital time controller
- Overall Dimensions: 10" x 12" x 22.5" (L x W x H)
- Weight (Approx): 8 kg
Glass Thermometer (57 degC/ 65 degC x 0.1 degC) for SayBolt Viscometer - ASTM 20C
Model Number: JRM-138
Glass Thermometer (95 degC/ 103 degC x 0.1 degC) for Oxidation Stability - ASTM 22C, IP 24C
Model Number: JRM-68
Analytical Electronic Balance - (220 GM x 0.0001 GM/0.1 MG) - External Calibration
Model Number: SAB-224-CL
Easily perform the following:-
- Dynamic Weighing Mode - Allows the user to weigh small animals and filters out animal movements to provide a stable weight indication
- Parts Counting with Optimization - Allows the user to count based on a calculated piece weight. With optimization, counting accuracy is improved through auto recalculation of the piece weight
- Percentage Mode - Allows the user to display the weight of a sample as a percentage of a reference weight
- Tantalization Mode - Allows the user to sum a series of sample weights
- Easy Access, Frameless Draught shield with Removable Doors - All side doors disassemble in seconds, and together with a stainless steel base, make it fast and easy to clean
- Latest 21st Century DLS Single Block technology Strong Anti-Shacking for highest stability and accuracy
- Single Touch External Calibration
- Back-light LCD for easy view.
- Weight approx in kg: 7.4kg
- Housing Dimension: 210 x 280 x 350 mm (WXDXH)
- Power Supply: External Adapter, 100-120VAC 150mA, 220-240VAC 100mA, 50/60 Hz Plug configuration for US, Euro, UK, Japan & Australian
Glass Thermometer (30 degC/ 200 degC x 0.5 degC) for Softening Point - ASTM 16C/ IP 61C
Model Number: JRM-96
- Measurement Range: 30 °C to 200 °C
- Graduation: 0.5 °C
- Overall Length: 378–384 mm
- Stem Diameter: 6.0–7.0 mm
- Bulb Length: 9–14 mm
- Bulb Diameter: Not larger than stem diameter
- Graduated Length: 243–279 mm
- Major Graduation Lines: At every 1.0 °C
- Numbering: At every 5 °C
- Accuracy (Scale): ±0.3 °C
- Distance from Bottom of Bulb to 0 °C Mark: 75–90 mm
- IP Ref.: 61C
- ASTM Equ.: 16C
- Calibration/NABL Calibration at extra cost.
Rubber Content of Crumb Rubber Modified Bitumen - Soxhlet Method
Model Number: EIE-BT-110
As per As per ASTM D6814, AASHTO M-320, AUSTROADS TEST METHOD AGPT/T142. To determine the rubber content of crumb rubber modified bitumen (CRMB) using a Soxhlet extraction method. The rubber in crumb rubber modified bitumen is extracted using a suitable solvent in a Soxhlet extractor. The non-rubber component (bitumen) dissolves in the solvent, leaving the rubber residue, which is then weighed to determine the rubber content.
Hand Gloves - Asbestos 5%
Standard Penetrometer for Bitumen - Manual Control - Basic Model
Model Number: TM-044M
Compliance Standards: IS 1448 (part 60), IS 1203, ASTM D5,
Basic Model. The apparatus consist of a cast aluminum base with an iron stand on which moves an aluminum arm. A 6" dial is fixed on this arm and a brass chromium plated rod slide through the lower portion of the arm. A needle with weights is fitted to this rod. The dial is graduated from 0‑400 in one tenth millimeter sub division. Supplied complete with adjustable needle holder, penetration needle, sample container, transfer dish and weight of 50 gm. Digital stop watch is essential to perform the test at extra cost. Model with Automatic controller and fine adjustment facility also available.
- Overall Dimensions in Inches (L x W x H): 9 x 11 x 21
- Weight (Approx.): 7 kg
Standard Penetrometer for Bitumen - Automatic Digital Timer - Basic Model - Dial Gauge
Model Number: TM-044ATB
Compliance Standards: IS 1203, IS 1448. ASTM D5
The apparatus consist of a cast aluminum base with an iron stand on which moves an aluminum arm. A 6" dial is fixed on this arm and a brass chromium plated rod slide through the lower portion of the arm. A needle with weights is fitted to this rod. The dial is graduated from 0‑400 in one tenth millimeter sub division. Supplied complete with adjustable needle holder, penetration needle sample container, transfer dish and weight of 50 gms. With automatic DIGITAL timer with electrical arrangement.
- Overall Dimensions in Inches (L x W x H): 10 x 12 x 22.5
- Weight (Approx.): 6 kg
Apparatus For Determination of Residue on Sieve
Model Number: EIE-BE-106
Compliance Standards: IS-8887, Annex- B
Apparatus for determination of residue on 600 microns IS sieve as per IS-1887 Annex- B.
- 02 nos 600 microns sieve.
- 02 nos Enamel Tray 10 X 12 inch.
- 02 nos PP containers of 4 liters Capacity.
- 02 Nos. Measuring Cylinder 1 Ltr. Capacity.
- Glass or metal dish - about 110mm dia
Density Basket As Per ASTM D6390 - Drain Down Test
Standard basket meeting the dimensions shown in Fig. 1 as per ASTM D6390 / as per IRC SP 79 2008. Dimension is mentioned in above mention code "annex-C" Page no. 16. The basket is constructed using standard 6.3 mm sieve cloth. Standard basket meeting the dimensions shown in Fig. 1. The basket is constructed using standard 6.3 mm sieve cloth as specified in Specification E 11. 108 ± 10.8 mm dia X 165 ± 16.5mm height. Basket bottom will be of 25mm ± 2.5mm height.
Fraass Breaking Assembly with Accessories As per IS 9381
Model Number: EIE-FBA
Compliance Standards: EN 12593, IS 9381
Applications:
Used for determining the breaking point of solid and semi-solid bitumen. The Fraas Breaking Point is the temperature at which bitumen first becomes brittle, as indicated by the appearance of cracks when a thin-film of the bitumen on a metal plaque is cooled and flexed in accordance with specified conditions.
- Overall Dimensions in Inches (L x W x H): 5" x 5" x 20"
Particle Charge Tester (ASTM D244) With Accessories
Model Number: EIE-BE-110ASTM
Compliance Standards: EN 1430, ASTM D244
Applications: Used to determine the particle charge of Bitumen Emulsion.
The equipment comprises of following items:
- Digital Milli ammeter scale up to 12 mA on support base
- Variable resistor
- Two stainless steel electrodes
- Insulating device
- Beaker 500 ml
- Glass rod
- Rehostat-2000 ohms
- Battery-12 v
- Ammeter-0.1 amp
- Power supply : 250 Volts, single phase,50/60Hz
- Dimensions : 200 x 200 x 600mm
- Weight : 3 kg approximately
Camber Board - 4.5 MTR
Model Number: CB-4.5.1
camber rod
Pavement Intensity Test Apparatus
Specification:
It is a multifunctional testing instrument for the material of road base and pavement. This can be used with many kinds of testing accessories to test the compressive strength, indirect intensity test and bearing ratio of soil and pavement material. It can also be used to test the thermal stability and Marshall test of bituminous material.
The machine has a sturdy frame having two chrome-plated pillars and crosshead to work up to 100 kN axial load having two speeds of loading to perform various tests such as bearing ratio, Marshall lest. The speed can be adjusted with the help of a mechanical lever fitted on a main frame. It can be run on forward and reverse mode also.