CSS DB9 to DB9/DC Power Splitter
Need to log CSS CAN bus data with an external power supply?
CSS DB9-to-DB9/DC power splitter, you'll be able to power e.g. your CSS CAN logger via a power outlet, battery or e.g. cigarette receptacle. The DC female connector is a standard 5.5 mm (ID, inner diameter) x 2.1 mm (CPD, center pin diameter).
CSS DB9 to DB9/DC Power Splitter is great for test setups, machine logging or vehicles where no power is provided by the DB9 connector (or you prefer not to use the CAN bus power supply).
About the CSS DB9-DC Adapter
CSS DB9-DB9/DC adapter lets you power your CSS CANedge/ CSS CLX000 via an external power supply - e.g. if no power is available via the CAN connector.
CSS DC connector is 5.5 mm (ID) x 2.1 mm (CPD), meaning that it fits most standard power supply options.
Technical Specifications
| General | |
|---|---|
| Adapter Cable Length | 15 CM (both cables) |
| Adapter DC Connector | 5.5 mm (ID) x 2.1 mm (CPD) |
| Adapter Pins | In accordance with CiA 303-1 |
| Compatibility | High Speed CAN Bus (ISO 11898-2) incl. CAN FD, SAE J1939, OBD2, NMEA, CANopen |
| Cable Thickness | 22 AWG (0.50 mm2) |
| Connectors | 9-Pin D-Sub (DB9) male to female |
| Temperature | Operating temperature: -20degC to +80degC |
| Weight | 30G |
Adapter Pinout
| DB9 (female) | Function | DB9 (male) | DC Connector |
|---|---|---|---|
| 1 | N/C | ||
| 2 | CAN-L | 2 | |
| 3 | GND | 3 | Outer |
| 4 | N/C | ||
| 5 | N/C | ||
| 6 | N/C | ||
| 7 | CAN-H | 7 | |
| 8 | N/C | ||
| 9 | VCC | N/C | Center |