OPS

Tech Specs:
- Measures 2.8×2.4 inches
- Power Input: +9V to +15V unregulated DC
- Temperature sensor, 2.5V 3 ppm/C precision reference
- 4 channels of high-gain instrumentation ops
- User-configurable gain, filter, and offset
- Direct interface to thermocouples, RTD, or strain gauges
- Screw terminals
Similar expansion boards: Relay-7, OPA
Supported controllers: All
General Info
Measuring 2.8×2.4 inches, the OPS has 4 channels of instrumentation operational amplifiers with high input impedance (up to 100MO) varied by a single resister, and differential inputs. The CMRR, ratio of differential signal gain to common-mode signal gain, is typical 70db.
The high input impedance adjustable-gain differential amplifier is constructed with three operational amplifiers. Two operational amplifiers are operated in the no inverting mode. The input impedance at each input pin of the differential amplifier is the common-mode input impedance of the OP chips, depending on the type of OPS used. For example, the input impedance of LM324 (default) is typical 2M.
You can upgrade the op-amps to the LT1014, which has input impedance of 300M. The CMRR is typically 110db for the LT1014.
Depending on jumper settings, it can provide output as either voltage or current, and can operate with or without filter.
The OPA is a similar expansion board that provides integrated 16-bit ADC.
OPS
Includes 4 high-gain instrumentation ops, 2.5V reference, on-board temperature sensor. Does not include add-on options or controller.
Add-on Options
- Upgrade ops (LT1014) (up to 4)
Related Products

