LittleDRive (LD)

Tech Specs:
- Measures 5.7×4.1 inches
- Power: <200 mA
- Power input: +8.5 to + 12V w/ linear reg. or +8.5 to +35 V w/ switching regulator
- TEN RS-232 serial ports (6 configurable as RS485)
- Octal UART
- 14 solenoid sinking drivers, 8 sourcing
Similar boards: FlashCore-N, S-Drive
Supported controllers: i386-Engine, A-Engine, etc.
General Info
The Philips Octal UART SC26C198 provides eight full-duplex UARTs. Each UART has a 16-byte receiver FIFO and a 16-byte transmit FIFO.
Automatic flow control uses Xon/Xoff or hardware CTS/RTS handshaking at one of 22 baud rates. Ten RS-232 drivers support full-duplex TxD/RxD and handshaking. Up to six RS-485 drivers can be installed. Two UARTs from the installed processor controller can use the other two RS232 drivers.
Two PPI (82C55) provide 48 I/O lines. There are 14 sinking solenoid drivers and eight sourcing drivers (350 mA, 50V). An optional switching power supply supports up to 35V DC input without generating excess heat.
LittleDRive (LD)
Includes Octal UART, 24×2 PPI, solenoid drivers, 10 RS-232 drivers. Does not include add-on options or controller.
Add-on Options
- Switching power regulator
- Low power version
- RS-485 drivers (up-to 6)
Related Products

