Solinst 101B Water Level Meters feature a basic design, making them a very economical option for depth to water level measurements. The 101B uses polyethylene flat tape, heat embossed in centimeter increments. Tape lengths available are 30 m, 60 m, and 100m. The robust stainless steel P1 Probe is ½” (12.7 mm) in diameter.

Bladder Pumps for Groundwater Samples

Once you’ve measured your water level, take a groundwater sample using a Solinst Bladder Pump. Bladder Pumps ensure no air/water contact during operation, providing representative groundwater samples and excellent VOC sample results.

Related Products


Water Level Meter

The Solinst 101 Water Level Meter with P7 Probe uses extremely durable PVDF Solinst laser marked flat tape, accurately etched every 1/100 ft or millimeter, certified traceable to National Standards.

Laser Marked Water Level Indicators

Solinst Model 102 Water Level Indicators have permanent, accurate, laser marked cables. Markings every 1/100 ft or each millimeter.

Drive-Point Multilevel System

The 615ML Multilevel Drive-Point System allows monitoring of up to 6 zones in one drive, using ports with a dual barb stem to attach either ¼” or ?” OD tubing. Install using extensions and a Manual Slide Hammer, similar to standard 615 installations, for high-resolution vertical groundwater or soil gas profiling.

Solinst Sonic Water Level Meter

The 104 Solinst Sonic Water Level Meter is a portable, acoustic ranging instrument designed to simply and quickly provide depth to static water level measurements down to 600 m (2000 ft), without the need to lower equipment down a well. Ideal for straight, crooked, narrow, hard to access, or contaminated wells.