RYRR10S
Multiprotocol Fully Integrated 13.56MHz RFID & NFC Antenna Module
- ST CR95HF NFC/RFID Engine.
- Supports Near Field Communication (NFC) ISO/IEC 18092.
- Completely Integrated Protocol Handling for ISO/IEC 15693, ISO/IEC 14443A, ISO/IEC 14443B.
- NXP MIFARE Classic compatible.
- Designed with PCB integrated antenna.
- UART / SPI Interface optional.
Description
The RYRR10S antenna module is a 13.56-MHz RFID and Near Field Communication (NFC) system. Built-in programming options make the device suitable for a wide range of applications for proximity and vicinity identification systems.
Specification
| Item | Min. | Typical | Max. | Unit | Condition |
| Operation Voltage | 2.7 | 5.5 | V | VDD | |
| VOH | 0.9*VDD | VDD | VDD | V | TXD High-level output voltage |
| VOL | 0 | 0 | 0.1*VDD | V | TXD Low-level output voltage |
| VIH | 0.7*VDD | 3.3 | VDD | V | RXD Low-level output voltage |
| VIL | 0 | 0 | 0.3*VDD | V | RXD Low-level input voltage |
| RF Output Power | 55 | mW | |||
| Reader mode current | 70 | mA | VDD=3.3V | ||
| Tag detect mode current | 50 | 100 | uA | 4 RF bursts per second | |
| Sleep state current | 20 | 80 | uA | ||
| Communication Range | 4 | 8 | cm | Depending on the RFID TAG. | |
| Startup time | 6 | ms | |||
| Baud Rate | 57600 | bps | 8, N, 1 | ||
| RF Frequency Range | 13.553 | 13.56 | 13.567 | MHz | |
| Opearting Temperature | -25 | 25 | +85 | °C | |
| Antenna | Internal | ||||
| Weight | 4 | g |