
- HRS U.FL-R-SMT-1 I-PEX IPEX Ultra miniature low profile coaxial connectors.
- Small mouting area.
- Light weight: 15.7mg
- Accepts high frequency transmission.
- Automatic board placement.
- Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated) cable.
- Simple connector mating/ unmating.
- Verification of the fully mated condition.
Description
HRS U.FL-R-SMT-1 I-PEX IPEX Ultra miniature low profile coaxial connectors.
Specification
Item | Specification | Conditions |
1. Contact resistance | Center : 20 m ohms max. Outer : 10 m ohms max. | 10 mA max. |
2. Insulation resistance | 500 M ohms min. | 100 V DC |
3. Withstanding voltage | No flashover or insulation breakdown. | 200 V AC / 1 minute |
Item | Part No. | Up to 3GHz | 3 to 6GHz |
U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly | 1.3 Max | 1.35 Max | |
U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly | 1.3 Max | 1.3 Max | |
V.S.W.R.* | U.FL-LP-066 dia.1.13mm Coaxial Cable Assembly | 1.3 Max | 1.4 Max |
U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly | 1.3 Max | 1.5 Max | |
U.FL-LP-062 dia.1mm Coaxial Cable Assembly | 1.3 Max | 1.3 Max | |
U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly | 1.3 Max | 1.4 Max |
5. Durability (mating / un-mating, with corresponding plug) | Contact resistance Center : 25 m ohms max. Outer : 15 m ohms max. | 30 cycles |
6. Vibration | No electrical discontinuity of 1?s min. | Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration of 59m/s2, for 5 cycles in the direction of each of the 3 axis. |
7. Shock | No damage, cracks or parts dislocation. | Acceleration of 735 m/s2, 11ms duration, sine half-wave waveform, 3 cycles in each of 3 axes. |
8. Humidity (Steady state) | No damage, cracks or parts dislocation. Insulation resistance 10 M ohms min.(humidity high) Insulation resistance 500 M ohms min.(dry) | 96 hours at temperature of 40c and humidity of 95%. |
9. Temperature cycle | No damage, cracks or parts dislocation. Contact resistance: 25 m ohms max. (Center) 15 m ohms max. (Outer) | Temperature: -40?C/+5 to +35?C /+90?C/+5 to +35?C Time: 30min./ 3min. /30min./ 3min. 5 cycles |
10. Salt spray | No excessive corrosion | 5% salt water solution, 48 hours |