PLIN-USB
LIN Interface for USB
Peak System PLIN-USB LIN Interface for USB enables the connection of a Windows computer to a LIN network via USB. The adapter supports the LIN protocol according to the standard ISO 17987 and complies with all LIN specifications up to version 2.2. The PLIN-USB interface can be operated as a master or a slave.
The monitor software PLIN-View Pro and the PLIN programming interface for the development of applications with LIN connection are included in the scope of supply.

PLIN-USB
IPEH-004052
Technical Specifications
- Adapter for the USB connection (Full-Speed mode, compatible with USB 1.1, USB 2.0, and USB 3.0)
- LIN connection (ISO 17987)
- Compliant with all LIN specifications
- (up to version 2.2)
- Bit rates from 1 kbit/s up to 20 kbit/s
- Can be used as a LIN master or slave (1 ms master task resolution)
- Automatic bit rate, frame length, and checksum type recognition
- Autonomous scheduler with support for unconditional, event, and sporadic frames
- LIN bus connection via D-Sub, 9-pin
- LIN connection short-circuit-proof against transceiver supply and ground
- NXP TJA1028T LIN transceiver
- Galvanic isolation on the LIN connection up to 500 V
- Indicator LED for interface status
- Adapter supply 5 V DC via USB port
- Transceiver supply 6 – 28 V DC via D-Sub, pin 9
- Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Scope of Supply
- PLIN-USB in plastic casing
- LIN interface drivers for Windows 11, 10, 8.1 (32/64 bit)
- LIN monitor PLIN-View Pro for Windows
- Programming interface PLIN-API for developing applications with LIN connection
- Manual in PDF format