CAN USB Adapter Interface

CAN Interface for USB

Peak System PCAN-USB adapter interface enables simple connection to CAN networks. Its compact plastic casing makes it suitable for mobile applications.

The opto-decoupled version guarantees galvanic isolation of up to 500 Volts between the PC and the CAN side.

The package is also supplied with the CAN monitor PCAN-View for Windows and the programming interface PCAN-Basic.



CAN Interface for USB, PCAN USB opto-decoupled, IPEH-002021, IPEH-002022

PCAN-USB

IPEH-002021


PCAN-USB opto-decoupled

IPEH-002022

Technical Specifications

  • Adapter for the USB connection (Full-Speed mode, compatible with USB 1.1, USB 2.0, and USB 3.0)
  • High-speed CAN connection (ISO 11898-2)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Time stamp resolution approx. 42 µs
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • CAN bus connection via D-Sub, 9-pin
  • (in accordance with CiA® 303-1)
  • NXP SJA1000 CAN controller, 16 MHz clock frequency
  • NXP PCA82C251 CAN transceiver
  • Galvanic isolation on the CAN connection up to 500 V (only for IPEH-002022)
  • CAN termination can be activated through a solder jumper
  • 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
  • Voltage supply via USB
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Scope of Supply

  • PCAN-USB in plastic casing
  • Device drivers for Windows 11, 10, 8.1, and Linux (32/64-bit)
  • Device driver for Windows CE 6.x (x86 and ARMv4 processor support)
  • CAN monitor PCAN-View for Windows
  • Programming interface PCAN-Basic for developing applications with CAN connection
  • Programming interfaces for standardized protocols from the automotive sector
  • Manual in PDF format