PCAN-miniPCI
CAN Interface for Mini PCI
Peak System PCAN-miniPCI card enables the connection of embedded PCs and laptops with Mini PCI slots to CAN networks.
The card is available as a single or dual-channel version. The opto-decoupled versions also guarantee galvanic isolation of up to 300 Volts between the PC and the CAN sides.
The package is also supplied with the CAN monitor PCAN-View for Windows and the programming interface PCAN-Basic.

PCAN-miniPCI Dual Channel
IPEH-003045
PCAN-miniPCI Single Channel opto-decoupled
IPEH-003046
PCAN-miniPCI Dual Channel opto-decoupled
IPEH-003047
Technical Specifications
- CAN interface for the Mini PCI slot
- 1 or 2 High-speed CAN channels (ISO 11898-2)
- CAN bus connection via connection cable and D-Sub, 9-pin (in accordance with CiA 303-1)
- Bit rates from 40 kbit/s up to 1 Mbit/s
- Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
- NXP SJA1000 CAN controller, 16 MHz clock frequency
- NXP TJA1040 CAN transceiver
- 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
- Galvanic isolation on the CAN connection up to 300 V, separate for each CAN channel (only for IPEH-003046 and IPEH-003047)
- Operating temperature range from 0 to 70 °C (32 to 158 °F)

Scope of Supply
- PCAN-miniPCI card
- Connection cable including D-Sub plug for each channel
- Device drivers for Windows 11, 10, 8.1 and Linux (32/64-bit)
- Device driver for Windows CE 6.x (x86 and ARMv4 processor support)
- CAN monitor PCAN-View for Windows
- Programming interface PCAN-Basic for developing applications with CAN connection
- Programming interfaces for standardized protocols from the automotive sector
- Manual in PDF format
