PCAN-MicroMod FD Analog
Configurable CAN FD Module with Focus on Analog I/Os

PCAN-MicroMod FD Analog 1
IPEH-003087
Description
The PCAN-MicroMod FD plug-in board can be purchased together with ready-to-use motherboards that provide peripherals for specific requirements. For the connection of CAN, I/O, and power supply, spring terminal connectors are used. The motherboard PCAN-MicroMod FD Analog 1 puts the emphasis on analog inputs and outputs, which are provided with appropriate protective circuitry.
The PCAN-MicroMod FD is configured using the supplied Windows software. In addition to simple I/O mapping to CAN IDs, function blocks are also available for processing the data. The configuration created on the computer is transferred via the CAN bus to the PCAN-MicroMod FD which then runs as an independent CAN node. Multiple modules can be configured independently on a CAN bus.
All PCAN-MicroMod FD products can alternatively be operated with CANopen firmware.
Requirements:
The configuration requires a PEAK CAN interface.
Technical Specifications
- Board with plugged on PCAN-MicroMod FD
- Configuration via the CAN bus with the Windows software PCAN-MicroMod FD Configuration
- High-speed CAN connection (ISO 11898-2)
- Complies with CAN specifications 2.0 A/B and FD
- CAN FD bit rates for the data field (64 bytes max.) from 20 kbit/s up to 10 Mbit/s
- CAN bit rates from 20 kbit/s up to 1 Mbit/s
- Switchable CAN termination
- 2 frequency outputs
- Low-side switches
- Adjustable frequency range from 0 to 20 kHz
- 1 analog input for voltage monitoring up to 30 V, resolution 12 bit
- 8 analog inputs
- Resolution 16 bit
- Measuring range adjustable: ±2.5 V, ±5 V, ±10 V, ±20 V
- 4 analog inputs
- Resolution 12 bit
- Measuring range 0 – 10 V
- 4 analog outputs
- Resolution 12 bit
- Voltage range adjustable: 0 – 5 V or 0 – 10 V
- 4 digital inputs
- Pull-up or pull-down configurable
- 4-bit rotary coding switch for setting the module ID
- 3 status LED
- Aluminum casing with spring terminal connectors
- Operating voltage 8 to 30 V
- Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
Scope of Supply
- PCAN-MicroMod FD
- PCAN-MicroMod FD motherboard in aluminum casing including mating connectors (Phoenix Contact FMC 1,5/10-ST-3,81 – 1748053 & Phoenix Contact DFMC 1,5/11-ST-3,5 – 1790195)
- PCAN-MicroMod FD Configuration for Windows
- Manual in PDF format

Requirements:
The configuration requires a PEAK CAN interface.