PCAN-MicroMod Digital 1 & 2
Application-specific PCAN-MicroMod Motherboards
PCAN-MicroMod Digital 1 (Low-side)
IPEH-002200
PCAN-MicroMod Digital 2 (High-side)
IPEH-002201
Description
The motherboards for the PCAN-MicroMod provide an application-oriented environment. Typical characteristics of this product group include a wide supply voltage range and the protective circuit for the inputs and outputs. CANopen firmware is available for all PCAN-MicroMod motherboards.
The Digital 1 & 2 motherboards serve general digital requirements.
Requirements:
The configuration requires a PEAK CAN interface.
Technical Specifications
- High-speed CAN connection (ISO 11898-2)
- Bit rates from 10 kbit/s up to 1 Mbit/s
- Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
- Completely configurable using the Windows software PCAN-MicroMod Configuration
- Operating voltage 8 to 26 V
- Status LEDs for power supply and digital output
- Aluminum casing with spring terminal connectors. Optional DIN rail fixing available
- Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
- 8 digital inputs:
- Pull-up or Pull-down circuit selectable in groups (3 groups)
- Schmitt trigger behavior, inverting
- Threshold High = 4.8 V, Low = 1.2 V
- Low pass behaviour
- Parallel connection of frequency inputs at 4 digital inputs for alternative use (e.g. on rapid state changes, counting)
- 5 digital outputs:
- PCAN-MicroMod Digital 1: 4 Low-side switch, max. 45 V, 0.35 A
- PCAN-MicroMod Digital 2: 4 High-side switch, max. 26 V, 1.1 A
- 1 fast Low-side switch, max. 55 V, 0.75 A, max. 10 kHz („frequency output“)
- Short-circuit protection
Scope of Supply
- PCAN-MicroMod
- PCAN-MicroMod motherboard in casing including mating connectors (Phoenix Contact FK-MCP 1,5/10-ST-3,81 – 1851122)
- PCAN-MicroMod Configuration Software for Windows
- Manual in PDF format
CANopen firmware is available for all PCAN-MicroMod motherboards.
Requirements:
The configuration requires a PEAK CAN interface.