PCAN-MicroMod Analog 1 & 2
Application-specific PCAN-MicroMod Motherboards

PCAN-MicroMod Analog 1
IPEH-002204
PCAN-MicroMod Analog 2
IPEH-002207
Description
The motherboards for the PCAN-MicroMod provide an application-oriented environment. Typical characteristics of this product group include a wide supply voltage range and the protective circuits for the inputs and outputs. CANopen firmware is available for all PCAN-MicroMod motherboards.

The Analog 1 & 2 motherboards serve general analog requirements.
Requirements:
The configuration requires a PEAK CAN interface.
Technical Specifications
Technical Specifications Analog 1
- High-speed CAN connection (ISO 11898-2)
- Bit rates from 10 kbit/s up to 1 Mbit/s
- Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
- Completely configurable using the Windows software PCAN-MicroMod Configuration
- Operating voltage 11 to 26 V
- Status LEDs for power supply and digital output
- Aluminum casing with spring terminal connectors. Optional DIN rail fixing available
- Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
- 8 analog inputs:
- Measuring range unipolar 0 to 5 V
- Resolution 10 bit, sample rate 1 kHz
- Measuring range extension optional
- Pull-down circuit
- Protection against under- and overvoltages
- Parallel connection of a digital input each for alternative use (e.g. push buttons)
- 4 analog outputs:
- Voltage range 0 to 10 V (based on 8-bit PWM)
- Output current 15 mA per channel
- Short-circuit protection
Technical Specifications Analog 2
- High-speed CAN connection (ISO 11898-2)
- Bit rates from 10 kbit/s up to 1 Mbit/s
- Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
- Completely configurable using the Windows software PCAN-MicroMod Configuration
- Software low pass filter can be adjusted by means of configuration (1 – 1000 ms)
- Operating voltage 11 to 30 V
- Status LEDs for power supply and digital output
- Aluminum casing with spring terminal connectors. Optional DIN rail fixing available
- Extended operating temperature range from -40 to 85 °C (-40 to 185°F)
- 8 analog inputs:
- Measuring range bipolar -10 to 10 V
- Resolution 16 bit
- Sample rate depends on the number of used channels (2 kHz/n)
- Low-pass behavior
- Protection against under- and overvoltages
- 4 analog outputs:
- Voltage range 0 to 10 V (based on 12-bit DAC)
- Output current 20 mA per channel
- Short-circuit protection
Scope of Supply
- PCAN-MicroMod
- PCAN-MicroMod motherboard in casing including mating connectors (Phoenix Contact FK-MCP 1,5/10-ST-3,81 – 1851122)
- PCAN-MicroMod Configuration software for Windows
- Manual in PDF format

CANopen firmware is available for all PCAN-MicroMod motherboards.
Requirements:
The configuration requires a PEAK CAN interface.