PCAN-Chip USB
Stamp Module for the Implementation of CAN FD to USB Connections
For custom hardware designs a CAN connection can be implemented with the Stamp module, which communicates via USB 2.0 with the hardware. The integrated CAN controller supports the protocols CAN 2.0 A/B as well as CAN FD. The physical CAN connection is determined by external wiring. The Stamp module with its single-sided mounting and plated half-holes is suitable for automatic assembly.
The optional Peak System CAN-Chip USB Eval board simplifies the development of a custom board based on the Stamp module.
In addition to the documentation for the integration of the Stamp module, the scope of supply of the CAN-Chip USB includes licenses for the Windows and Linux device drivers, for the CAN monitor PCAN-View, and for the PCAN-Basic API.
PCAN-Chip USB Eval
IPEH-004025-EVAL
Technical Specifications
PCAN-Chip USB
- High-speed USB 2.0 (compatible to USB 1.1 & 3.0)
- FPGA implementation of the CAN FD controller
- Complies with CAN specifications 2.0 A/B and FD
- CAN FD support for ISO and Non-ISO standard switchable
- Measurement of bus load including error frames on the physical bus
- Induced error generation for incoming and outgoing CAN messages
- 100-percent compatible with the USB device drivers and the software from PEAK-System
- Connections for 2 status LEDs
- 5 digital inputs/outputs and 1 analog input (access via PCAN-Basic API)
- Power supply 3.3 V DC
- Firmware update via USB
- Dimensions: 25 x 20 mm
- Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
PCAN-Chip USB Eval
- CAN bus connection via D-Sub, 9-pin (in accordance with CiA 303-1)
- CAN transceiver NXP TJA1044GT
- USB connector type B, standard ESD protection circuit
- Dual-color LED for CAN status and power supply
- Power supply via USB
- Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
Scope of Supply
PCAN-Chip USB
- Stamp module PCAN-Chip USB; delivery, depending on quantity, as cut tape or reel for automatic placement machines
- Documentation for wiring and integration including a sample circuit diagram
- One license per chip for:
- Device drivers for Windows 11, 10, 8.1 and Linux (32/64-bit)
- CAN monitor PCAN-View for Windows
- Programming interface PCAN-Basic for developing applications with CAN connection
- Programming interfaces for standardized protocols from the automotive sector
PCAN-Chip USB Eval
- PCAN-Chip USB Eval
- PCAN-Chip USB incl. scope of supply
- USB connector cable