LIN Connection Cable for PCAN-LIN
Pre-configured Cable Set for the PCAN-LIN Module

LIN Connection Cable for PCAN-LIN
IPEK-003008
Description
On the PCAN-LIN module, the field buses and the power supply are connected together via a D-Sub plug. However, for some applications a separate access to the LIN components is necessary.
The LIN connection cable for PCAN-LIN allows the tapping of individual lines. The LIN and the supply lines are lead directly out to separate plugs and the CAN lines are forwarded to a D-Sub plug.
The connection cable can be used without problems for CAN FD buses.
Please Note: The LIN connection cable for PCAN-LIN is not suitable for use with our PC LIN interfaces.

Technical Specifications
- Pre-configured cable set for PCAN-LIN
- Split-up of the lines from the CAN/LIN connector to:
- CAN (D-Sub plug, 9-pin)
- LIN (banana plug, 4 mm)
- Power supply for LIN (banana plugs, 4 mm)
- Length about 1.00 m
- Without terminating resistor
- Suitable for the use in CAN FD buses
Scope of Supply
- LIN Connection Cable for PCAN-LIN
Other lengths and special cable makeup on request.