Accessories for CAN products
Termination resistors, plugs and cables
As accessories for the CAN products, HMS offers terminal resistors of various designs, plugs and cables for the connection of nodes as well as adapter cables.





Sub-D9 Connector with
CAN Termination
Order no.: 1.04.0075.03000
- 120 Ohm for High-Speed CAN systems according to ISO 11898-2
- Male to female
- Pin assignment 1-to-1
- RT between pin 2 and 7
- Screw UNC #4-40
SUB-D9 Connector with
two CAN Terminations
Order no.: 1.04.0075.30003
- 120 Ohm for High-Speed CAN systems according to ISO 11898-2
- Male to female
- Pin assignment 1-to-1
- RT between pin 2 and 7 and pin 1 and 4 (ideal for CANnector, FRC-EP190, CAN-IB 640/PCIe and CAN-IB boards with MultiCAN expansion)
- Screw UNC #4-40
CAN Termination (Plug)
Order no.: 1.04.0075.02000
- 120 Ohm for High-Speed CAN systems according to ISO 11898-2
- Male
- RT between pin 2 and 7
CAN Termination (Socket)
Order no.: 1.04.0075.01000
- 120 Ohm for High-Speed CAN systems according to ISO 11898-2
- Female
- RT between pin 2 and 7




Y CAN cable
Order no.: 1.04.0076.00001
- All pins connected (1-to-1)
- Length 12 cm (cable)
- Sub D9 socket to sub D9 socket/plug
- Shield
Y CAN cable
Order no.: 1.04.0076.00002
- All pins connected (1-to-1)
- Length 2 m (cable)
- Sub D9 socket to sub D9 socket/plug
- Shield
CAN Adapter Cable
Order no.: 1.04.0074.01000
- RJ45 plug to Sub D9 plug
- Length 20 cm
- Set of two cables
CAN cable
Order no.: 1.04.0076.00180
- All pins connected
- Length 2.0 m
- Sub-D9 plug (1xF / 1xM)
- Shield




T bus connector
Order no.: 1.04.0073.00000
Order no.: 1.04.0076.00004
This product is in the “Limited Phase” and not recommended for new developments.
Glass fiber cable ST
Order no.: 1.04.0003.01022 (2 meter)
Order no.: 1.04.0003.01025 (5 meter)
This product is in the “Limited Phase” and not recommended for new developments.
Glass fiber cable F-SMA
Order no.: 1.04.0003.01012 (2 meter)
Order no.: 1.04.0003.01015 (5 meter)
This product is in the “Limited Phase” and not recommended for new developments.
- For creating star/tree topologies in combination with the Ixxat CAN Repeaters
- Serial cable for CAN@net, CANbridge and LIN2CAN
- 2 x Sub D9 socket
- Length 2.0 m; Shield
- Duplex
- For FO repeater and star coupler
- With 2 plugs on each side
- Wavelength 820 nm
- Glas fiber 50/125 µm
- Attenuation 3 dB/km
- Duplex
- For FO repeater and star coupler
- With 2 plugs on each side
- Wavelength 820 nm
- Glas fiber 50/125 µm
- Attenuation 3 dB/km

Power Cable for CANnector
Order no.: 1.04.0089.00002
- 3 pin Phoenix Contact Plug (Power) to 3 x 4 mm banana plugs
- For CANnector
- Length: 2 m