CAN-IB630/PCIe 104
Active CAN FD Interface for PCI/104-Express
2 x CAN FD, CAN (High-Speed)
With the CAN-IB630/PCIe 104 HMS offers a PCI/104-Express board based on a modern and powerful concept. The interface is available with two CAN-FD channels. Each channel can send and receive CAN FD (ISO as well as non-ISO format) or CAN 2.0 A/B messages.

Features and benefits
- Active board with 32 bit microcontroller
- Two CAN FD channels
- Galvanic isolation of the CAN interface
- Uniform driver packages support all IXXAT CAN and CAN-FD interfaces and allow easy change of the PC interface type
- Powerful programming interface for Windows “VCI” as well as “ECI” for Linux, QNX, RTX, INtime and VxWorks
Versions
The CAN-IB630/PCIe 104 is available with two CAN channels and galvanic isolated interfaces.
Technical specifications
PC bus interface | PCI express (V1.1) |
PC address range | Plug & Play |
Interrupts | Plug & Play |
Microcontroller | 32 bit microcontroller |
CAN interface | 2 CAN FD / CAN 2.0 A/B interfaces; bent 2 x 5 pin connector according to CiA 303-1; galvanic isolated (1 kV, 1 sec.) |
CAN bitrates | 10 kbit/s to 1 Mbit/s (high-speed) |
CAN FD bitrates | Arbitration rate up to 1000 kBit/s, data rate up to 8000 kbit/s. The data rates are verified by tests. User-defined bit rates are possible. Attention: The maximum data rate can be exceeded depending on the concrete operating conditions (cable length, settings made, remote stations,…), but it can also not be reached. |
Power supply | 3.3 V DC, 390 mA typ. |
Temperature range | -40 ºC … +85 ºC |
Certification | CE, FCC |
Size | Approx. 90 x 96 mm |
Contents of delivery
- PC/CAN interface card, manual
- Adapter cable IDC / DSub-9
- CAN driver VCI for Windows 11, Windows 10 (32/64) / Windows 8 (32/64) / Windows 7 (32/64) / Windows XP SP2 (older versions on request)
- Simple CAN monitor “canAnalyser Mini”
Order numbers

Accessories
