Humidity transmitters and temperature transmitters for weather monitoring.


  • 4-20 mA output
  • Marine grade cable with strain relief
  • Fully encapsulated electronics

Humidity and Temperature Transmitters Product Description

The Global Water Humidity Sensor is a precise, durable unit. Humidity sensors are composed of a solid state capacitative element with a linear amplifier. The humidity sensor output is 4-20 mA with a three wire configuration. The Global Water Temperature Sensor is a high quality, rugged instrument, precision RTD calibrated to US National Standards. The temperature sensor output is 4-20 mA with a two wire configuration. Each sensor is mounted on 25 ft of marine grade cable, with lengths up to 500 ft available upon request. The electronics are completely encapsulated in marine grade epoxy within a stainless steel housing.

The Global Water Solar Shield is a ventilated sun shield, with high reflectiveness, low heat retention, and low thermoconductivity. The unit is designed to protect the Global Water Humidity and Temperature sensors from direct sunlight that may affect the sensor’s 4-20 mA output.

What is Relative Humidity?
Air moisture content is typically described by a relative humidity measurement.  Relative humidity is the ratio of the water vapor content to the concentration of water vapor that the atmosphere could hold.  In general, the relative humidity will vary inversely with air temperature so that the relative humidity is highest when the temperature is lowest, and vice versa.  Typically after sunrise, when the air warms, the relative humidity falls.  Relative humidity is typically given in a percentage reading.  The vapor in the air is considered at 100% relative humidity when the concentration of water vapor in air is equal to the water vapor concentration at saturation.

Why Measure Relative Humidity?
Relative humidity has a major effect on the environment.  Humidity readings provide a chance to control these effects.  Effects include causing discomfort in people or animals, damaging materials in warehouses or other storage facilities, affecting the climates for optimal production processes, impacting the quality of construction materials and many others.

What is Temperture and How is it Affected?
Temperature is typically measured in degrees Celsius of Frhrenheit.  To accuratly measure temperature the temperature sensor should be shielded from direct sunlight or precipitation and it should be adequately ventilated.  Usually “surface” air temperature is measured approximately two meters above the surface.

The factors that affect temperature sensors include latitude, the movement of air masses, solar radiation, and nearby bodies of water or land. Typically solar radiation and latitude are the biggest influences on the temperature reading.

Humidity and Temperature Sensors Specifications

Humidity Sensor
Type: Capacitance
Output: 4-20 mA
Range: 0 to 100% RH
Accuracy: ±2% RH
Operating Voltage: 10-36 VDC
Current Draw: 3mA plus sensor output
Warm Up Time: 3 seconds minimum
Operating Temp: -40 to +131°F (-40 to +55°C)
Sensor Size: 1-1/8 inch diameter x 7 inch (2.9 cm dia. x 18 cm)
Weight: 0.5 lb. (227 g)

Temperature Sensor
Type: Precision RTD
Output: 4-20 mA
Range: -58 to +122°F (-50 to +50°C)
Accuracy: ±0.2°F or ±0.1°C
Operating Voltage: 10-36 VDC
Current Draw: Same as sensor output
Warm Up Time: 3 seconds minimum
Storage Temp: -58 to +212°F (-50 to +100°C)
Sensor Size: 3/4 inch diameter x 4-1/2 inch (2 cm diameter x 11.4 cm)
Weight: 0.5 lb. (227 g)

Solar Shield
Size: 4 inch diameter x 8-1/2 inch (10 cm diameter x 21.6 cm)
Weight: 1 lb. (454 g)

Humidity and Temperature Transmitters Options

WE600 Humidity Sensor (PN# EE0000)
Includes 25 ft of cable.

WE700 Temperature Sensor (PN# EF0000)
Includes 25 ft of cable.

WE770 Solar Shield (PN# EG0000)
Global Water recommends the purchase of a Solar Shield with the purchase of a Humidity Transmitter or Temperature Sensor.

WQEXC Extra Cable (PN# DH0000)
Standard Humidity and Temperature sensors include 25 ft of cable, but can be purchased with up to 500 ft of cable.


WE710 Flat Surface Temperature Sensor (PN# EFA000)

TLC 730 Handheld Infrared Thermometer (PN# 1340-5730)

TFI 550 Non-contact Thermometer (PN# 1340-1786)

TFH 610 Handheld Hygrothermometer (PN# 1340-5610)

RH300 Portable Psychrometer (PN# DK 1300)

RH305 Digital Psychrometer Kit
Includes RH300 psychrometer, external temperature probe, 33% and 75% calibration bottles, 2 AAA batteries and carrying case. (PN# DK1305)

EBI-20-T1-Set Temperature Datalogger Kit
Includes EBI-20-T datalogger, Winlog.basic software, EBI-20 interface, and USB cable. (PN# 1601-0046) 

EBI 100-T101 Temperature Data Logger (PN# 1340-6501)

RH520A Paperless Humidity/Temperature Chart Recorder (PN# EEA000)

WE Weather Sensors

EZ100 Temperature or Humidity Transmitter Display
LCD readout display for both portable use and permanent installations. (PN# GA0000)

WE800 Weather Station Data Logger
This system is designed for remote monitoring sites. (PN# EH0000)

WE900 4-20mA Weather Station
This system is designed for integration with existing SCADA, PLC, or RTU systems. (PN# ER0000)

GL500 Humidity or Temperature Recorder
Humidity or Temperature recorder for sensor datalogging. Includes Global Logger Software. With weather proof enclosure and 12V battery.

PC320 Humidity and Temperature Meter and Alarm