Automatic Stormwater or Wastewater Samplers.
- Ideal for wastewater, industrial and environmental sampling
- CE Certified
- Does composite, discrete or both types of sampling
- Simple to operate – no programming required
- Quick disconnect pickup hoses conveniently stored inside the enclosure for easy transport
- Heavy duty wheels and retractable handle built in
- Rugged construction for harsh environments
- Meets federal, state and local wastewater regulations
- Timed and external flow proportional sampling
- Adjustable and repeatable sample volume
- Peristaltic pump prevents sample contamination
- Automatic backflush clears pickup strainer and hose
- Enclosed battery compartment and smart battery charger to improve battery life
- The easiest and most reliable method for collecting water quality samples
Wastewater/Stormwater Samplers Product Description
Our new WS755 improved two-bottle wastewater/stormwater samplers combine all the features you need to meet a wide variety of sampling requirements, including those for stormwater, industrial discharge, water and wastewater treatment, waste collection systems, and rivers and streams.
The WS755 wastewater/stormwater sampler’s state of the art controller gives you complete control over your wastewater/stormwater sampling process. With the wastewater/stormwater sampler’s sample size control, you can take individual time-weighted composite samples or full-bottle discrete grab samples. The wastewater/stormwater sampler’s sample interval control allows you set the time between individual composite samples or enable the external trigger mode. A start delay timer allows you to start multiple wastewater/stormwater samplers in the field at the same time, or to delay drawing a wastewater/stormwater sample after a triggering event so that your sample better represents the water source. An automatic 15 second backflush cycle clears any debris from the wastewater/stormwater sampler’s strainer and empties the water from the hose so the next sample is not contaminated.
A unique feature of the WS755 stormwater/wastewater samplers is the ability to set the sampling mode for each pump and bottle individually. This allows you to take two individual time-weighted or flow proportional composite samples, or you can set the stormwater/wastewater samplers to take full-bottle discrete (grab) samples, or you can set them to take a full-bottle discrete (grab) sample in one bottle and a time-weighted or flow proportional composite sample in the other. In the case of two composite samples you can have different size settings for each pump.
Improved Water Sampler Enclosure
The stormwater/wastewater water sampler’s rugged rainproof enclosure can be padlocked and/or chained to prevent tampering. The stormwater/wastewater samplers are enclosed in a case that can be easily hidden or camouflaged to prevent vandalism. The samplers are lightweight enough that even with a full sample bottle the stormwater/wastewater samplers can be suspended, from the over-molded handle on top, in a manhole or tree. The compact enclosure features heavy duty polyurethane wheels and a retractable extension handle for easy transportation. The pickup hoses come with quick disconnect fittings which allows them to be disconnected from the stormwater/wastewater sampler and conveniently stored inside the enclosure when being moved or when not in use.
The wastewater/stormwater sampler’s 5 AH rechargeable battery will power the sampler for several months or several sampling events. The sealed gel-cell battery and BC100 smart charge controller are contained in a separate battery box inside the wastewater/stormwater sampler’s main enclosure to isolate and protect electrical connections. The included smart charger prevents overcharging and greatly extends battery life over other charging methods. Optional AC and solar panel charging options are available, see the Wastewater/Stormwater Samplers Options.
The wastewater/stormwater sampler’s sample bottles are each equipped with a float switch that automatically turns off the peristaltic sampling pump if the water bottle becomes full.
The user can adjust the wastewater/stormwater sampler’s peristaltic pumps individually to one of 15 composite sample sizes from 50ml to 2 liters plus a full bottle discrete setting. The wastewater/stormwater sampler’s peristaltic pumps can be set to a single sample time interval from 5 minutes to 12 hours plus an external trigger mode setting for flow proportional sampling.
Flow Proportional Sampling
An external pulse-type flow meter can control the water sample interval for true flow proportional sampling. Global Water’s Open Channel Flow Monitor has a flow-proportional output signal for triggering the WS755 stormwater/wastewater samplers. If you already have a flow meter but it has a 4-20mA output, please look at the related products section of the Wastewater/Stormwater Samplers Options
Remote Water Sampling Notification
Attach the AD200 Autodialer or CVD-2000P Cellular Autodialer to your wastewater/stormwater sampler to add remote sample notification. This accessory will save you travel time by ensuring that you always know when your wastewater/stormwater samplers have taken a sample at your monitoring sites.
The WS755 improved wastewater/stormwater samplers come with two 1-gallon polyethylene sample bottles for collecting composite samples, two peristaltic sampling pump, a circuit board controller, and a rechargeable gel cell battery. Also provided are two sample pickup hoses and a battery charger. Everything you need is provided for a successful wastewater management or environmental monitoring program.
Stormwater/Wastewater Samplers Specifications
Operating Temperature: 32° to +158°F (0° to +70°C)
Enclosure: Expanded UV protected PVC
Bottles: Two 1 gallon polyethylene
Pickup Hose: 15 ft (4.6 m) reinforced PVC 1/4 inch ID polyethylene flexible tubing section with 20-Mesh intake strainer and quick-disconnect fittings
Pump Tubing: Norprene 1/4″ ID, 7/16″ OD
Flow Rate: 1000 ml per minute at a 4 foot head
Maximum Lift: ~20 ft (6 m)
Battery: Rechargeable 5 AH Gel Cell
One Pump running continuously: ~1 hour
Two Pumps running continuously: ~ ½ hour
Standby: 3 months while still retaining enough power both pumps to capacity
Start Delay: 16 time settings from 0 to 12 hours
Composite Interval: 15 time settings from 5 min. to 12 hours plus an External Trigger mode setting
Sample Size: 15 composite sample sizes from 50 ml to 2 liters plus a Full Bottle discrete setting (Approximate sizes at 4 foot head)
External Trigger Input: 250 mS minimum pulse width
Switch closure or 4-30 VDC
Pulse Output: 5 VDC one-second pulse
1000 ohm output impedance
Bottle Switch Input: Switch closure Input
Floating read switch in bottle
Rain and Water Sensors: Optional moisture sensors or switch closure inputs
Internal Fuse: 10A Slow-Blow
Charger: 18 VDC Regulated Switching Supply, 330 mA 6 Watt, 2.1 mm Connector
Size of unit: 22x18x10 inch (56×45.7×25.4 cm) (HxWxD)
Weight: 30 lb (13.6 kg) (Shipping Weight 32 lb (14.5 kg))
Stormwater/Wastewater Samplers Options
WS755 Improved Stormwater/Wastewater Sampler (PN# CT1000)
Includes the following parts: a rugged, rainproof, lockable carrying enclosure, two 1 gallon polyethylene sample bottles, two peristaltic sampling pumps, a control panel enclosed logic timer/controller, two 15 ft reinforced PVC sample pickup hoses with removable debris strainers, a 5 AH rechargeable gel cell battery, and BC100 Smart Charger.
IMPROVED STORMWATER/WASTEWATER SAMPLERS ACCESSORIES
WSSWK Stormwater Kit (PN# CTU000)
Includes CA0400 Rain Sensor, CA0500 Flow Sensor and RG333 Auto-drain Rain Gauge.
SP102 Solar Panel (5 watts, 15 V minimum) (PN# FH0000)
Supplemental Power for remote Composite/Discrete Water Sampler sites.
SP140 Solar Panel (40 watts, 15 V minimum) (PN# 01-914)
Supplemental Power for remote Composite/Discrete Water Sampler sites.
AD200-1 Voice Alarm Autodialers (PN# FA0100)
Voice alarm autodialers includes one inputs and four phone/pager numbers.
CVD-2000P Cellular Autodialer (PN# FA0350)
Includes the AD200-4 autodialer, cellular phone, and AC adapter.
IMPROVED STORMWATER/WASTEWATER SAMPLERS REPLACEMENT PARTS
12V 5AH Rechargable Battery (PN# 329417)
Battery Charger (120VAC to 12VDC Universal) (PN# 329585)
¼ inch Pickup Hose (PN# 00-546)
Quick-Disconnect Fitting Plug & Cap (PN# CA0850)
Tubing Quick-Disconnect Fitting (PN# CA0860)
20-Mesh Pickup Strainer Assembly (PN# CA0600)
Replacement 20-Mesh Pickup Strainer Head (PN# 01-881)
Optional 6-Mesh Pickup Strainer Head (PN# 01-945)
Peristaltic Pump Tubing (PN# 00-744)
Rain Sensor (PN# CA0400)
Flow Sensor (PN# CA0500)
Float Switch (PN# CB0200)
1 Gallon Plastic Bottle (PN# 00-418)
RG333 Auto-Drain Rain Gauge
WS700 Composite/Discrete Water Sampler
Single pump composite or discrete water sampler. (PN# CU0000)
WS705 Improved Composite/Discrete Water Sampler (PN# CU1000)
Includes the following parts: a rugged, rainproof, lockable carrying enclosure, two gallon polyethylene sample bottle for composite sample, one peristaltic sampling pump, a control panel enclosed logic timer/controller, one 15′ reinforced PVC sample pickup hose with removable debris strainer, a 5 AH rechargeable gel cell battery, and BC100 Smart Charger.
WS750 Stormwater/Wastewater Sampler
Dual pump stormwater or wastewater sampler. (PN# CT0000)
RG750/RG755 4-20mA to Pulse Converter Module (PN# ELC000/ELD000)
This module is for use with flow monitors that produce a 4-20mA output. There are two versions available, one that pulses every 15 minutes at 20mA (RG750) and one that pulses every 30 minutes at 20mA (RG755). Please specify the unit conversion that best suits your application at the time of order.
OxiTop® BOD Measurement Instrumentation
BOD measuring instrument for self-check with 6 measuring units, universal power supply, 50/60 Hz power plug, and accessories.
GL500-7-2 Multichannel Data Logger (PN# FQ0000)
Features 7 analog channels and 2 pulse channels, USB and serial communication port, and includes software and cables. Requires an external 12 VDC power source.
Specify Serial or USB version when ordering. Features 2 analog channels and 1 pulse channel. Includes two internal 9V batteries, Windows-based Global Water Datalogger Software, and PDA software for the CE operating system. (PN# FR0000)
FSS Flow Sampling System
A unique combination of instruments that makes monitoring, sampling, and recording stormwater or industrial discharge water flows easy.
WQS Water Quality Sampling System
A unique combination of instruments that allows for monitoring, sampling, and recording of water flows that exceed a water quality parameter such as turbidity, pH, conductivity, ect.
SIT65 Satellite Internet Telemetry
Replace the datalogger on your composite sampler with a telemetry system that pages you or alerts you via text messaging that your sampler took a sample. (PN# FM1000)
SP250 Quick Release Water Sampler (PN# CJ0500)
Includes ¼ inch tubing, 15 ft long pick up tube and strainer, and 10 ft battery cable.