WQ101 TEMPERATURE SENSOR
Water temperature transmitter and water temperature recorder.
FEATURES:
- Fully encapsulated electronics
- 4-20 mA output
- Marine grade cable with strain relief
- Stainless steel housing
Water Temperature Sensors Product Description
Global Water’s submersible temperature sensor is a rugged reliable water temperature measuring device. The temperature transmitter probe is molded to 25 ft of marine grade cable, with lengths up to 500 ft available upon request. The temperature sensor has a two wire configuration for minimum current draw. The temperature transmitter’s electronics are completely encapsulated in marine grade epoxy within a stainless steel housing (online version has ¾ x 6 inch PVC pipe nipple, threaded both ends with cap).
Global Water’s GL500 Temperature Recorder adds recording capabilities to the temperature transmitter. The GL500 Temperature Recorder connects to the temperature sensor’s 4-20mA output to record data. In addition, Global Water offers the PC320 Temperature Controller to use the temperature transmitter’s output to control pumps or alarms.
Water Temperature Sensors Specifications
Output: 4-20 mA
Range: -58 to +122° F (-50 to +50°C)
Accuracy: ±0.2°F or ±0.1°C
Maximum Pressure (Open Water): 200 psi
Maximum Pressure (Online): 50 psi
Operating Voltage: 10-36 VDC
Current Draw: Same as sensor output
Warm Up Time: 5 seconds minimum
Operating Temperature: -58 to +212° F (-50 to +100°C)
Size of Probe:
Standard: 3/4″ Diameterx 4-1/2″ L (1.9 cm dia. x 11.4 cm long)
Online: 1-3/4″ Diameter x 8″ L (4.3 cm dia. x 20.3 cm long)
Weight:
Standard: 8 ounces (227 g)
Online: 9.4 ounces (272 g)
Water Temperature Sensors Options
WQ101 Temperature Sensor (PN# DA0000)
Includes 25 ft of cable. not included.
WQ101-O Online Temperature Sensor (PN# DAA000)
Comes with ¾” NPT PVC housing. Includes 25 ft of cable.
WQEXC Extra Cable (PN# DH0000)
Standard temperature sensors include 25 ft of cable, but can be purchased with up to 500 ft of cable.
RELATED PRODUCTS
WQMS Water Quality Monitoring System
The standard unit includes a datalogger, temperature sensor, pH sensor, conductivity sensor (with a 0-5000µS range unless otherwise specified), and DO sensor.
GL500 Temperature Recorder
Temperature recorder for sensor datalogging. Includes Global Logger Software. With weather proof enclosure and 12V battery.
EBI-20-T1-Set Temperature Datalogger Kit
Includes EBI-20-T datalogger, Winlog.basic software, EBI-20 interface, and USB cable.
EBI 100-T101 Temperature Data Logger
WQS-STD Temperature Sampling System
NOTE: Temperature sensor not included.
EZ100 Temperature transmitter Display
LCD readout display for both portable use and permanent installations.
