MICRO-FLOW FLOW VERIFICATION SENSORS
Flow verification sensors for constantly monitoring chemical flow.
Flow Verification Sensors Product Description
Are you sure your chemical pump is actually pumping? An empty chemical tank, clogged injection fitting, lost prime, and other problems can prevent a metering pump from actually injecting chemical – even though the pump is in good working order! The Micro-Flow Flow Verification Sensor can be connected directly to model A-100NV and C-1100V metering pumps to verify that chemical is actually flowing. The Flow Verification Sensors work with the pump’s sophisticated electronics to constantly monitor chemical flow. If chemical should fail to inject, the flow verification sensors will cause the pump will stop and an alarm relay will close allowing for remote alarm indication or initiation of a back-up injector pump.
Flow Verification Sensors Specifications
Max. Working Pressure: 150 psig (10.3 bar) @ 70° F (21° C)
Max. Fluid Temperature: 200° F (93° C) @ 0 PSI
Body, Paddle, Axle material: PVDF
Connector material: PVDF
O-ring seals: Viton
Compression seal to pump: PVC
Approximate shipping wt: 1 lb. (.45 kg)
Flow Verification Sensors Options
FV-100-6V Flow Verification Sensors (PN# JB0114)
11.4 to 114 GPD (30 to 300 ml/Min)
FV-200-6V Flow Verification Sensors (PN# JB0380)
38.0 to 380 GPD (100 to 1000 ml/Min)
FV-300-6V Flow Verification Sensors (PN# JB0760)
76.0 to 760 GPD (200 TO 2000 ml/Min)
FV-400-6V Flow Verification Sensors (PN# JB1140)
114 to 1140 GPD (300 to 3000 ml/Min)
FV-500-6V Flow Verification Sensors (PN# JB1900)
190 to 1900 GPD (500 to 5000 ml/Min)
FV-600-6V Flow Verification Sensors (PN# JB2660)
266 to 2660 GPD (700 to 7000 ml/Min)
RELATED PRODUCTS
A100NE Fixed Speed Digital Peristaltic Pump
A100NV Variable Speed Digital Peristaltic Pump