EC500 CONDUCTIVITY METERS

Combination rugged flat surface pH electrode with autoranging high accuracy Conductivity cell.

EC500 CONDUCTIVITY METERS

FEATURES:

  • Measures 5 parameters
  • 9 Units of measure
  • Waterproof conductivity tester
  • Analog bar graph
  • Saves up to 25 readings

Conductivity Meters Product Description

The EC500 Conductivity Meters can measure 5 different parameters including Conductivity, TDS, Salinity, pH, and Temperature using the conductivity meter’s single electrode. With the 5 parameters the conductivity meters offer 9 units of measure including pH, uS/cm, mS/cm, ppm, ppt, mg/L, and g/L, °C, and °F. The conductivity meters display the results on a large LCD screen that supports an Analog bar graph to indicate trends, a RENEW feature to alert you that the pH sensor needs replacement, and a low battery indicator.

The EC500 Conductivity Meters were designed to be easy to use in harsh environments. The conductivity meters are waterproof to the IP67 standard, has enough memory to store up to 25 labeled readings, has an adjustable conductivity to TDS ratio factor that allows for convenient calculation of the TDS value, contains a fixed 0.5 fixed salinity ratio, and supports an automatic power shut off feature. The conductivity meter includes the electrode, protective sensor cap, sample cup with cap, four 1.5V SR44W batteries, and a 48 inch (1.2m) neckstrap.

Conductivity Meters Specifications

Conductivity Range: 0 to 199.9uS, 200 to 1999uS, 2.00 to 19.99mS
TDS/Salinity Range: 0 to 99.9ppm (mg/L), 100 to 999ppm (mg/L, 1.00 to 9.99ppt (g/L)
pH Range: 0.00 to 14.00pH
Temperature Range: 32° to 149°F (0° to 65°C)
Max. Resolution: 0.1uS, 0.1ppm (mg/L), 0.01pH, 0.1°F/ °C
Accuracy: +2%FS, +0.01pH, +1.8°F/1°C
Power: four SR44W button batteries
Size: 1.4×7.3×1.6″ (36x186x41mm)
Weight: 3.8oz (110g)

Conductivity Meters Options

EC500 Conductivity Meter (PN# DK0500)
Includes electrode, protective sensor cap, sample cup with cap, four 1.5V SR44W batteries, and a 48 inch (1.2m) neckstrap.

EC510 Conductivity Meter Kit (PN# DK0510)
Includes an EC500 portable conductivity meter with sensor, 84uS, 1413uS, 12880uS calibration standards, pH buffer pouches (1 each of 4, 7, 10pH plus rinse solution), weighted base, protective sensor cap, 3 sample cups, four 1.5V SR44W batteries, carrying case, and a 48 inch (1.2m) neckstrap.

EC505 Spare pH/conductivity meter cell (PN# DK0505)

CA895 Carrying Case, Small with Belt Loop (PN# DK0106)

EX010 Extension Cable, 3ft (1 Meter) with probe weight (PN# DK0010)

EX050 Extension Cable, 16ft (5 Meter) with probe weight (PN# DK0050)

RELATED PRODUCTS

EC30A Conductivity Tester
Includes meter and conductivity cell, batteries, and instruction manual.

EC300ACC Field Conductivity Meter Kit
Includes field conductivity meter, cable with attached conductivity/temperature probe, and hard sided case.

2CA102 Cond 3110 Set Handheld Conductivity Meter Set
Includes meter, tetraCon 325-3, case & accessories.

Lab 960 Benchtop Conductivity Meter

WQ-Cond Conductivity Sensor
4-20mA output.  Includes 25 ft of cable.

WQ Water Quality Sensors