392 INDUSTRIAL CONDUCTIVITY TRANSMITTERS
Conductivity transmitters and conductivity recorders for measuring low conductivity.
- Isolated 4-20 ma output
- Selectable Wide Measurement Range
- Automatic Temperature Compensation
- 1/8 DIN Mounting
- Adjustable Zero
- High 50/60 Hz Noise Rejection
392 Industrial Conductivity Transmitters Product Description
The industrial conductivity transmitter is a 4-wire 4-20 mA conductivity transmitter enclosed in a 1/8 DIN aluminum mounting enclosure. The industrial conductivity transmitter has an isolated 4-20 mA output with display on a large LCD screen powered by 115/230 VAC. The conductivity transmitter has selectable conductivity values from 19.99 uS/cm to 199.9 mS/cm via internal dip switch and jumper settings. The industrial conductivity transmitters use a 10k thermistor for 5 to 55°C values for automatic temperature compensation. The industrial conductivity transmitter connections are made with terminal blocks via spade lug connectors.
Global Water’s GL500 Conductivity Recorder adds recording capabilities to the conductivity transmitter. The GL500 Conductivity Recorder connects to the conductivity transmitter’s 4-20mA output to record data. In addition, Global Water offers the PC320 Conductivity Controller to use the conductivity transmitter’s output to control pumps or alarms.
Industrial Conductivity Transmitters Specifications
Range: Selectable via dipswitch and jumper
Accuracy: +1% of Span + 1 Digit
ATC: 41 to 131°F (5 to 55°C) +2%/°C, 10k Thermistor
Output: 4-20mA (Isolated)
Load: 450 ohms
Isolation to GND: 500 VDC
Input Impedance: >1012 ohm
Operating Temperature: 41 to 113°F (5 to 45°C)
Power Source: 115 to 230 VAC +15%, 50/60Hz
Mounting: 1/8 DIN Aluminum Case
Dimensions: 3.75x2x6.75 inch (96x48x172 mm)
Weight: 1.5 lbs (0.69 kg)
Industrial Conductivity Transmitter Options
392 Industrial Conductivity Transmitter (PN# DO0110)
Industrial Conductivity Transmitter Sensor not included.
392SBC Industrial High Range Conductivity Transmitter (PN# DO0120)
Range 0-5mS or 0-15mS. Conductivity Sensor not included.
Conductivity Sensor Stainless Steel Armor (PN# DD05392-121 Industrial Conductivity Sensor (PN# DO0140)
SS probe, Platinum, 0 to 5000 uS, 10-ft cable, ABS Plastic Body, 3/4 in MNPT mounting, Tinned Leads. NOTE: For 392SBC only.
EC30A Conductivity Tester
Includes meter and conductivity cell, batteries, and instruction manual.
EC300ACC Field Conductivity Meter Kit
Includes field conductivity meter, cable with attached conductivity/temperature probe, and hard sided case.
EC500 Pocket pH/Conductivity Tester
Includes electrode, protective sensor cap, sample cup with cap, four 1.5V SR44W batteries, and a 48 inch (1.2m) neckstrap.
EC510 Pocket pH/Conductivity Tester Kit
Includes an EC500 portable conductivity meter with sensor, 84uS, 1413uS, 12880uS calibration standards, pH buffer pouches (1 each of 4, 7, 10pH plus rinse solution), weighted base, protective sensor cap, 3 sample cups, four 1.5V SR44W batteries, carrying case, and a 48 inch (1.2m) neckstrap
2CA102 Cond 3110 Set Handheld Conductivity Meter Set
Includes meter, tetraCon 325-3, case & accessories.
WQ-Cond Conductivity Sensor
4-20mA output. Includes 25 ft of cable.
GL500 Conductivity Sensor Recorder
Conductivity recorder for sensor datalogging. Includes Global Logger Software. With weather proof enclosure and 12V battery.