WL430 WATER LEVEL SENSOR

SEWAGE LIFT STATION WASTEWATER LEVEL SENSOR

Submersible waste water level sensor

Wastewater Level Sensor Product Description

Global Water’s Sewage Lift Station Wastewater Level Sensor (WL430) is based on over 30 years of design and field service heritage.

The Sewage Lift Station Wastewater Level Sensor’s “Steelcage” design offers the highest reliability in level measurement for severe high solids environments such as sewage, lift stations, storm canals, wet wells and slurry tanks. The waste water level transmitter system consists of a submersible pressure sensing element cased in a 316L SST housing. The lift station wastewater level sensor’s electronics are capable of withstanding lightning strikes and meet RCTA/DO 160D for lightning direct effects and surge protection for FAA and MIL-STD test and NASA standard electrical surge requirements. All Sewage Lift Station Wastewater Level Sensors are corrosion resistant and clog free.

The WL430 Sewage Lift Station Wastewater Level Sensor is supplied with 40 ft. of standard polyurethane shielded and vented cable. The lift station waste water level transmitter’s unique cable venting system allows for barometric pressure differential compensation while keeping the elements out, using a Gortex filter encapsulated tip. The “Steelcage” design gives full protection and allows sensing to sewage levels no matter how much debris/mud/sand or rags build up.

Wastewater Level Sensor Specifications

WL430 Wastewater Level Sensor Electrical
Supply Voltage: 8 – 38 Vdc
Output: 4-20 mA
Zero Balance: ± 1% Full Scale Output (FSO)
FSO Setting: ± 1% FSO
Resolution: Infinite ( ±0.001% FSO usable)
Response Time: < 5 mS
Insulation Resistance: 1000 MO @ 50 Vdc
Reverse Polarity: Protected
Warm-Up: < 10 mS
Power Supply Effect: = ± 0.002% FSO per V input
EMI/RFI: Internal Filtering
Lightning Protected: MOV and dual gas discharge tube
Short Circuit Protected: Up to 40 Vdc

Wastewater Level Sensor Performance
Static Accuracy: ± 0.5% FSO ( BFSL, RSS)
     (combined effects of non-linearity, hysteresis & repeatability)
Repeatability: ± 0.1% FSO
Temperature Effects: ± 1.5% FSO over comp range
     (combined effects of Zero & FSO with reference at 70°F)
Long Term Stability: ± 0.25% FSO per year

Wastewater Level Sensor Mechanical
Pressure Ranges: 10psi (23 ft) or 15psi (34 ft)
Proof Pressure: 2x Full Scale
Burst pressure: 5x Full Scale
Materials: 316L SST plus cable
Pressure Port: Flush mount per outline
Electrical Connector: 1/2 inch-NPT Male submersible conduit fitting with 40ft of polyurethane cable
Dimensions: 3 inch diameter x 6 inch long (7.6 cm dia. x 15 cm long)
Weight: Nominal 20 oz (.57 kg)
Compensated Temp Range: 20 to 170°F (-6 to 76°C)
Operating Temp Range: 0 to 200°F (-17 to 93°C)
Storage temp range: -20 to 250°F (-28 to 121°C)

Wastewater Level Sensor Options

WL430-023 Sewage Lift Station Wastewater Level Sensor (PN# AP0100)
Pressure range: 10psi (23 ft), includes 40 ft of cable

WL430-034 Sewage Lift Station Wastewater Level Sensor (PN# AP0200)
Pressure range: 15psi (34 ft), includes 40 ft of cable

Extra Cable for WL430 sensors
Standard Sewage Lift Station Wastewater Level Sensors include 40 ft of cable, but can be purchased with up to 500 ft of cable.  Please add two weeks for shipping with this option.

WL430-SRG Sewage Lift Station Wastewater Level Sensor Surge Protector (PN# AP0300)
Surge protector provides extra surge and lightning protection for the sewage lift station wasewater level sensor.  Requires 24VDC power.

RELATED PRODUCTS

WL400 Water Level Sensor
When ordering, specify water level range that will cover the maximum water level change for your application (this is not necessarily the total depth of water): 0-3, 0-15, 0-30, 0-60, 0-120, 0-250, 0-500 ft.  Selecting the smallest water level range possible will ensure the greatest accuracy.  Includes 25 feet of cable.

WL450 High Accuracy Submersible Water Level Transmitters

WL705 Ultrasonic Water Level Sensor
Specify Water Level Range: 3, 12, or 48 ft.  Includes 6 ft cable.