TERN SmartLCD 16bit CPU(Am188ES)[x86 compatible]  40MHZ C/C++ Programmable Controller, 72+ I/O, 7 solenoid drivers, Two RS232, Real Time Colck+Battery, 4 ch. 12bit DAC, 20ch. 12bit ADC, 320x240 graphic LCD, SED1335, Touch Screen

wpe1D.jpg (10658 bytes)

smart_lcd2.gif (18125 bytes)

1/4 monochrome VGA, touchscreen, DAC, ADC, I/O


SmartLCD Specs/Features:
* Measures 6.4x4.7x1.3 inches (controller 0.7, LCD 0.5 inches thick)

* 16-bit CPU (Am188ES), x86 compatible
* 40 MHz system clock
* 50 mA standby, 260 mA w/ backlight (12V)
* Temperature: -40 to +85 Celsius
* Up to 512 KB Flash/EPROM

* Up to 512 KB battery-backed SRAM
* 72+ TTL I/Os, plus 7 solenoid drivers
* 512 bytes serial EEPROM
* interrupts, timers/counters
* Two RS232 serial ports, optional third RS485/RS232
* Four channels 12-bit DAC, 0 to 4.095 V
* Real time clock, battery
* 20 ch. 12-bit ADC, up to 10 kHz sample rate (TLC2543)
* On-board +5V regulator, RS232/485 driver
* Dual MemCard support
* 320x240 graphic LCD, SED1335, touch screen, CCFL (module size 167x109 mm; viewing area 121x91 mm)

The SmartLCD is a complete user interface that includes a graphic LCD, touch screen, CCFL backlighting, LCD controller (SED1335), and a C/C++ programmable controller (Am188ES-compatible processor). The on-board power supplies support a 5V switching regulator, -24V, programmable contrast voltage, and CCFL.

The SmartLCD supports up to 512 KB ROM/Flash, 512 KB battery-backed SRAM, 512-byte serial EEPROM, real-time clock (RTC72423), three timers, watchdog, and up to three serial ports (RS-232/485). Three PPIs (82C55) provide 72 TTL I/Os in addition to the 32 multifunctional I/O pins from the CPU.

The 12-bit ADC has 11 inputs (0-5V, 10 kHz). Up to four 12-bit DAC (two are optional) provide 0-4.095V analog outputs. The SL uses ADC to monitor the power input, DAC to adjust the LCD contrast, and a solenoid driver to control the CCFL backlighting.

The seven solenoid drivers are capable of sinking 350 mA at 50V. Up to two MemCards can be installed, each supporting up to to 220 MB PCMCIA mass data storage.

The SED1335 supports various types of 1/4 VGA LCD modules. The SL PCB can be mounted on the back of the LCD via mounting holes.

Various TERN controllers can also be configured to easily interface character and smaller graphic LCDs.  Please be sure to inquire if such an option is available for the controller you are interested in.

smart_lcd-new.jpg (2739 bytes)


An aluminum bezel mounting for the SL, as shown above, is also available.

A more advanced version of this controller, complete with a color LCD interface, compact-flash adapter, and much more is also available at here.

Ordering Information
(40 MHz)       $599 each

Includes 188-processor  40 MHz with 32 I/Os, 320x240 LCD, touch screen, CCFL, PPIs, SED1335, 11 ch. 12-bit ADC, 2 ch. DAC, 128KB SRAM, power supplies. Does not include add-on options. OEM option discounts available.

Development Service: Testech Electronics provides cost effective development service for a full turnkey solutions to assist our customer with automating or customised  project using Tern controller. We help you to implement your ideas and solve your problem quickly. Contact us at sales@testech-elect.com or call +65-67492162 for a discussion on how you can speed up your projects.

Add-on Options:

1) SRAM: 512KB    $40
2) Debug ROM (TDREM_AE) $30
3) Real-time clock and battery $20
4) UART (SCC2691)+driver (up to 2)  (a) RS-232 / (b) RS-485 $30
5) 2 chips 12-bit DAC (LT1446) $40

  Back to TERN Main Page    |    Back to Testech Home Page    |    Compiler    |     RTOS    |    Emulator/Debugging