TERN PC-Co Embedded Controller Expansion Board,  upto 100 I/Os, upto 4 RS232/RS485drivers, 4 solenoid drivers, LCD interface. 3 power realys with NO,NC,COM


wpe1D.jpg (10658 bytes)
PC-Co
ISA Bus controller with 100 I/Os, 4 serial ports, 3 power relays
PC-Co Specs:
* Measures 4.9x4.2 inches
* Power: < 200 mA at 9V-12V
* Up to 100 I/O lines

* Up to 4 RS232/RS485 drivers
* 4 solenoid drivers
* LCD interface (character/LCD)
* 3 power relays with NO, NC, COM
* 5V linear regulator

The PC-Co (PC) is a low-cost I/O board with up to 100 I/O lines and a PC-ISA bus. You may use the PC-Co as a standalone controller or install it in a PC ISA slot as a co-processor board. It contains three power relays (5 A). It also has four solenoid drivers capable of sinking 350 mA at 50V.

Three PPIs (82C55) provide 72 I/O lines, and a special interface supports LCD modules. An on-board -12V power supply on-board makes it possible to support graphical modules as well.

The PC-CO can support as many as four serial ports, with three of the ports coming from the installed processor controller, and the fourth on an optional SCC2691. The SCC2691 port can be configured as RS232 or RS485, while the other three are RS232.

A DB25 connector provides three power relay contacts (NC, NO, COM), four solenoid drivers, and nine TTL I/O lines from the installed processor controller.

Ordering Information (Qty 1/100/1K/5K+)
PC
                    $129/$99/$79/$39
Includes 3 power relays, 24x3 I/O lines, interface for LCDs, 4 solenoid drivers, 4 RS-232 drivers, +5V, -12V power supply.  Does not include add-on options or controller.

Add-on Options:

1) UART (SCC2691) +
(a) RS232, (b) RS485
$30
2) Low power version $25
3) ISA bus interface $Call
 

  Back to TERN Main Page    |    Back to Testech Home Page    |    Compiler    |     RTOS    |    Emulator/Debugging