KitCON Evaluation Boards

The PHYTEC kitCON is a dedicated Evaluation Board.  All hardware required for immediate start-up is on-board, including DB-9 connectors (configurable as RS-232, RS-485 and CAN interfaces) and power connectors.  In essence, the kitCON integrates a PHYTEC stand-alone, insert-ready Single Board Computer module and a Carrier Board on a single PCB.  PHYTEC kitCONs are featured in Starter Kits from such manufacturers as Infineon and Silicon Storage Technologies (SST).


kitCON-16x

kitCON-16x

Configuration: C167CR, 64 KB SRAM, 256 KB Flash
PART #: KC-167-KSM04

The kitCON is a dedicated Evaluation Board in EURO-card dimensions (160 x 100 mm) supporting the Infineon C167CR controller. Includes AC/DC adapter, serial cable and Starterkit CD with documentation and demos.


kitCON-5xx

kitCON-5xx

Configuration: C515C, 32 KB SRAM, 128 KB Flash
PART #: KC-515

The kitCON is a dedicated Evaluation Board in EURO-card dimensions (160 x 100 mm) supporting Infineon C515 controller. Includes AC/DC adapter, serial cable and Starterkit CD with documentation and demos.


kitCON-FlashFlex51

kitCON-FlashFlex51

Configuration: SST89C58, 32 KB SRAM, 128 KB Flash
PART #: KSP-9810-1B

Configuration: FlashFlex51 Daughter Board
PART #: KSP-9810-1D

The kitCON is a dedicated Evaluation Board in EURO-card dimensions (160 x 100 mm) supporting SST FlashFlex51 family controllers. Populated with various SST FlashFlex51 devices with 36/68 KB on-chip SuperFlash memory. Includes AC/DC adapter, serial cable and Tool-CD with documentation and demos.


 


 Back to Phytec Home Page    Back to Testech Home Page    Compiler     RTOS    Emulator/Debugging