nohau_logo.gif (2889 bytes)

Nohau Real Time In Circuit Emulator, JTAG/BDM Debuggers for 8-bit, 16-bit, 32-bit Microcontroller, Hardisk Based GigaTrace

Tutorial And Visual Tour:  See our list of Tutorial for Nohau Tools.

Microcontroller Families Supported

8051 68HC11 P51XA MCS912 68HC12
68HC16 80C196 ST10 ARM 80C166
68300 80C296 MicroBlaze Power PC GigaTrace


    EMUL51-PC                    for the 8051     EMUL51-PC                  for the Philips XA (16 bit)
   8031, 80C31, 8051, 80C51,
   8053, 80C321, 80C32T2,
   80C52T2, 8751, 87C51, 8753.

   T89C51RB2/RC2/RD2, T8xC5101/02,
   T89C51IC2, TS80C31X2/32X2,
   AT89C1051, AT89C2051, AT89C51,    AT89C52, AT89LV51,AT89LV52,
   AT89C55, T89C51CC01/02

   DS80C310, DS80C320,
   DS80C323, DS8xC520, DS8xC530.

   8xL51 FA/FB/FC,
   8xC51 FA/FB/FC, 80C51 GB,
   8xC51 RA/RB/RC, 8xC51SL, 87C51,
   8752, 8052, 8xC54, 8xC58, 8751,

ST Microelectronics
   uPSD3200 (NEW)
SST (call for complete specs)
   SST89C54, SST89C58.

   80C31, 80C51, 80C154.

Philips 8 bit
   (purple for existing designs)
   8031, 80C31/8xC51, 80CL31/51,
   80CL32/52, 80C32/8xC52, 8051,
   8xC51 FA/FB/FC, 8xL51FA/FB,
   8xC524, 8xC528, 8xC542,
, 8xC552, 8xC554, 8xC557EX,    8xC575, 8xC652, 8xC654, 8xC754,    8xCL781/782, 8xC851.

Especially for New Designs:
   8xC51 RA/RB/RC/RD+,
   8xC51Rx2, 8xC591, 8xC592,
   8xC660, 8xC662, 8xC664, 8xC668.

Philips 80C51MX 8 Bit
Extended Addressing

   P80C51MB2, P80C51MC2, P89C669

Infineon 8 Bit
   8031, 8051, 8xC52,
   C513AO, C504, C505, C505A, C505C,    C505CA, C505L, C508, C515, C515A,    C515C, C517A.

   P51XAG3, P51XAS3, (G37 and C37 are same as G3 and C3)
   P51XAG49, P51XAC3, P51XA-H3, P51XA-H4.
    EMUL68-PC                  for the Motorola 68HC11
   68HC11A0/Al /A7/A8/811A8,
   68HC11C0, FL0,
   68HC11E0/E1 /811E2/E9/,
   711E9/E20, 68HC11F1/FC0,
   68HC11 G5/711 G5/G7,

   68HC711 KA2/711 KA4,
   68HC11KO/K1/K3/K4/711 K4,
   68HC11LO/L1/L5/L6/711 L6,
   68HC11N4/711 N4,
   68HC11P/711 PH,711 PH8,
   68HC11 P2/711 P2
    EMUL12-PC                 for the Motorola 68HC12 & HC9S12
   68HC812A4 (BDM only)
   68HC912B32, BC32, BD/BE32
   68HC912D60, DA128, DG128
   D60A, DT128A, DA128A, DG128A
   MC9S12DA128, A256, MCS912DP256,
   DJ256, DT256, DG256, DB128, DG128
   DT128, D64, DJ64, D32
   MC9S12H256, H128, H64, MC9S12A512,
   A256, A128, A64, B256, B128, C96, C64,
   C32, DP512, DT512, DJ512, DP256, DT256,
   DJ256, DG256, DT128, DJ128, DG128,
   DB128, DJ64, D64, D32, T64
    EMUL16/300-PC            for the 68HC16& 68300
   68330, 68331, 68332, 68F333, 68334,    68335, 68336, 68338, 68340, 68341,
   68349, 68360, 68376, 68396.

Some parts have BDM support only.
    EMUL196-PC                 for the Intel 80C196
   8xC196JQ/JR/JT, 8xC194, 8xC196,
   8xC196NP/NT/NU, 8xC198.
    EMUL166-PC                 for the C166 & ST10 (to 40 MHz)     EMUL-M16C-196-PC       for the Mitsubishi M16C
    EMUL-ST10 & FA-PC     for the ST10, FA & C166 (to 100 MHz)    M16C/60, M16C/61, M16C/62.
    EMUL-SUPER10-PC      for the Super10 (to 100 MHz)     EMUL-SX-PC       for the Ubicom SX (to 100 MHz)
   Cl67, Cl67CR, Cl67CS, Cl67SR, Cl65,    Cl63, Cl61RI, CS, JC, JI
   Cl61 V/K/O, C164CI, C161PI
   C161U (OCDS),C165 UTAH (OCDS)
   XC161(OCDS), XC164(OCDS)
   XC167(OCDS), C166S-V2
   ST10F163, ST10R163, ST10R165,    ST10C167, ST10F167, ST10R167,    ST10F168, ST10F169, ST10F269,    ST10R262, ST10R172L, ST10R272,    ST10R272L, Super10, Super10 OCELite.
   F269, F276, F280, Super10 NEXUS.
   SX18AC, SX20AC, SX28AC
   SX48BD, SX52BD, IP2022
    EMUL-AVR-PC       for the Atmel AVR (classic)
   ATtiny12, AT90S8515, 4414, 8535, 4434, 4433, 2333, and 2313. AT90LS2333,    AT90LS4434.
    EMUL-ARM-PC       for the ARM7 & ARM9
Nohau is adding new devices to the C166 and ST10 families at a rapid pace.
Please contact us for the latest list. Nearly every device is or will be supported.
There are devices not yet announced by Infineon and STMicroelectronics that
Nohau already supports. Contact your local rep or Nohau at
for information on these devices.
   ARM7TDMI, ARM920T, ARM940T and ARM9X6E cores with ETM
    EMUL-MicroBlaze-PC       for the Xilinx MicroBlaze
   40 MHz for the EMUL166-PC (E3 bondout)
   50 MHz for the EMULST10-PC and 90 MHz for EMUL-ST10-FA-PC
   100 MHz for the EMUL-Super10-PC and EMUL-C166S-V2-PC
   MicroBlaze Softcore for VirtexII, VirtexII-PRO and


  Back to Nohau Main Page    |    Back to Testech Home Page    |    Compiler    |     RTOS    |    Emulator/Debugging