SG-9624 Multifunction Automatic Water Sampler

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description
SG-9624 multifunction automatic water sampler can also be referred to as an equal proportion
wastewater sampler or portable water sampler. These devices are intended for use as environmental
monitoring equipment in surface and wastewater sampling, water source monitoring, investigating
pollution sources, and all around water quality control. It adopts an international water sampling
method carried out by peristaltic pump which is controlled by SCM (single chip microcomputer).
The users can input sampling intervals, sampling quantity and sampling methods according to their
requirements. The water sampler can automatically accomplish the corressponding tasks online.
After being equipped with a flow sensor, this water sampler can realize the dual-functions of
sewage flow measurement and proportional sampling.
 
Optional Interface to Testech PM035 LTE RTU Telemetry for Alert, check Status and remote control as well as interface to external sensors, controls of relays output

 

Application
SG-9624 multifunction automatic water sampler is a portable water sampler with separated bottles
and built-in 12V lithium battery. It is suitable for water sampling of determined sampling points of
rivers, lakes, oceans, surface water or pollution sources carried out by environmental monitoring
stations of all levels, occupational hygiene institutes and scientific research institues.

 

Sampling Method
 
Standard Sampling
Sampling Delay Time: Any Setting of 1-9999min with increment of 1 min
Time Intervals: Any Setting of 1-9999min with increment of 1 min
Sampling Volume: Can be set from 50~1000ml with increment of 1 ml
   
Mixed Sampling
Sampling Delay Time: Any Setting of 1-9999min with increment of 1 min
Time Intervals: Any Setting of 1-9999min with increment of 1 min
Sampling Volume: Can be set from 50~1000ml with increment of 1 ml
Mixed Sampling Number: 1~20
   
Parallel Sampling
Sampling Delay Time: Any Setting of 1-9999min with increment of 1 min
Time Intervals: Any Setting of 1-9999min with increment of 1 min
Sampling Volume: From 50~1000ml with increment of 1 ml
Parallel Sampling Number: 1~24
   
Flow Meter Controlled Sampling
Optional Specific Flow Meter to Control Sampling: Any Setting of 1-9999 pulse with increment of 1 pulse. The output should be 5V~15V positive pulse.
 
Flow Meter with Output Pulse to Control Sampling: Any Setting of 1-9999 pulse with increment of 1 pulse. The output should be 5V~15V positive pulse.

 

Features
The shell of the SG-9624 multifunction automatic water sampler is made of glass fiber reinforced plastics (FRP) which is acid and alkali resistant, corrosion resistant and aging resistant.
The water sampling equipment is equipped with a high capacity lithium battery,
so that both AC and DC power are available.
The pump pipe has a large daimeter and fast flow speed, thus effectively protecting the pipeline
from being blocked.
It can record the three-month of flow data with intervals of five minutes. Each grop of data
consists of monthly, daily, hour, minute and instantaneous flow rate.
This water sampler can record the total flow. The recording interval of each group of data can
be set freely.
The longer the interval, the longer the total recording time. The data recording adopts cyclic
regeneration.
 
Optional Units
Wireless communication module (wireless communication function: It can realize remote
sampling control carried out by any computer and mobile phone with an internet connection).
Ultrasonic flow measuring probe (flow-meter function).
Mini-printer.

 

Performance Capabilities
Number of Sample Bottles: SG-9624 multifunction automatic water sampler
  can realize 1-24 separated bottles water sampling
  of which the number of bottle can be set freely.
   
Peristaltic Pump Flow Characteristic: 3700ml/min, high speed and high flow sewage specific pump the inner diameter of the pump pipe
  is made of high intensity medical silicone tube.
   
Information Recording: The water sampler can automatically record and
  store the sampling data of each time.
   
Horizontal Suction Head: 50M, with an automatic sampling tube washing
  function.
   
Time control error of the system clock of the water sampler 1≤0.1% and
12≤30S;
   
Power-Off Protection: This sampling equipment can restart after power-off
  without losing any stored data.
   
Preset Program: This equipment can preset and store 10
  frequent-used working programs that can be called
  up directly according to sampling demands.
   
Software Lock: Only the adminstrator can use the sampler and
  modify the parameters in order to protect the built-in
  program of the equipment from being modified.

 

Parameters

 

External Sensor Interface:
 
VOC Fixed Sampling Sensor (0-100ppm, 0 - 1000ppm)
Level Sensor (Hydrostatic, Ultrasonic, Radar, Ceramic)
PH Sensor, ORP Sensors
DO Sensor
Turbidity Sensor
Flow Sensor (Radar or Surface Velocity Sensor)
Rain Gauge (0.2mm) allowing pump activation to active > xxmm/hour Rainfall
MultiParameter Digital Sensors (Custom Interface NRE is possible)

 


  Back to M2M  Main Page    |    Back to Testech Home Page    |   Water/Weather Instrumentations