WP GROUNDWATER PURGING PUMPS
Purging pumps for groundwater testing
 
Purging pumps for groundwater testing FEATURES:
 
  • Used and trusted within the groundwater industry for more than 15 years
  • Recommended by drillers, hydrologists and field technicians
  • Practical for dedicated use and disposal
  • Ready to use
  • Supplied with heavy gauge cable to reduce voltage drop (Super Purger)
  • Hermetically sealed electric connectors (Super Purger)
  • Reduces labor costs and saves time
  • Completely pre-assembled and packaged with leads and alligator clips
  • Connect leads to 12V DC power source and pump is energized
 
Groundwater Purging Pumps Product Description

Global Water's groundwater purging pumps provide an easy-to-use, high-quality, economical solution for purging, and groundwater testing to a depth of 60ft (18m).  The submersible groundwater testing purging pump's 1-5/8 in (40mm) diameter minimizes well hang ups and is ideal for use in 2 inch or larger monitoring wells.  Each purging pump is self priming when fully submersed and can be connected directly to a DC power source to begin pumping.  All groundwater testing pumps are tough and powerful with plastic construction and a stainless steel impeller.  The groundwater purging pumps can pump up to 3 US gallons (11.4 ltrs) per minute.  These groundwater testing purging pumps have been used and trusted within the groundwater industry for more than 15 years and are recommended by drillers, hydrologists and field technicians around the world.

The Submersible Groundwater Purging Pumps have an inlet strainer and any sand, rocks or debris that pass through the groundwater testing purging pumpís inlet strainer will pass through the purging pump without clogging it.  The ground water purging pumps can be run continuously for 48 hours even in dry conditions without motor damage.  The groundwater testing purging pumpís life expectancy is approximately 400 hours, lab tests have shown that the groundwater purging pumps can last up to 750 hours.  The submersible ground water testing pumps can achieve low flow sampling by restricting the outlet flow from the end of the sampling tube with a valve (or even by clamping the hose).  Restricting the submersible groundwater testing pumpís outlet flow will increase the effective head the groundwater purging pump has to deliver thus reducing output flow.  Being a centrifugal ground water testing pump this action will also reduce the current thus making the ground water testing pump use less energy increasing battery life.

Groundwater Purging Pumps Specifications

Description/Model Number: Mini Purger
WP4012
Super Purger
WP6012
Voltage: 12V DC
Maximum Current Draw: 5 amps 10 amps
Dimensions: 160mm (6.3") X 40mm (1.58") 345mm (13.6") x 40mm (1.58")
Outlet Diameter: 11mm (3/8") and 13mm (1/2") adapter supplied
Operating Temperature: Maximum 140įF (66įC)
Materials: Pump Body: ABS, Seals: Nitrile, Strainer: Polypropylene, Impeller: Stainless Steel/PBT, Cable: PVC
Recommended Pumping Duration: Intermittent use.  Running periods should be restricted to 15 minutes followed by a 5 minute cool-down period

 

Model Current
Draw
Output Performance (in gallons per minute) at Head (in ft)
10 20 30 40 50 60
WP4012 Mini Purger 40ft of cable attached 2.0-3.5 Amp 3.2 2.0 1.0 0.1    
WP6012 Super Purger 60ft of cable attached 3.3-6.4 Amp 3.0 2.3 1.6 1.1 0.5 0.1
Note. Tests carried out with full lengths of cable attached

Groundwater Purging Pumps Options

WP4012 Mini Purger groundwater purging pump
12 Volt, includes 40' of cable and battery clips
   
WP6012 Super Purger groundwater purging pump
12 Volt, includes 60' of cable and battery clips
   
RELATED PRODUCTS
GP Submersible Groundwater Pumps
Submersible groundwater pumps are ideal for groundwater testing in wells.
   
GP Inline Water Pumps
Inline Water Pumps increase the maximum depth the submersible groundwater pumps can pump.
 

  Back to GlobalWater Main Page    |    Back to Testech Home Page    |    M2M Remote Monitoring