Flat surface temperature sensors for remote monitoring.
surface temperature sensors FEATURES:
  • 4-20 mA output
  • Marine grade cable with strain relief
  • Fully encapsulated electronics
Surface Temperature Sensors Product Description
The Global Water Surface Temperature Sensors are high quality, rugged instruments with a precision RTD calibrated to US National Standards.  The surface temperature sensor's output is 4-20 mA with a two wire configuration.  Each of the surface temperature sensors is mounted on 25 ft of marine grade cable, with lengths up to 500 ft available upon request.  The surface temperature sensor's electronics are completely encapsulated in marine grade epoxy within an ABS plastic housing.


Surface Temperature Sensor Applications
The surface temperature sensors are well suited for many applications including, pipe temperature monitoring, solar panel temperature, water tanks, control panels, battery monitoring, and many others.


What is Temperature and How is it Affected?
Temperature is typically measured in degrees Celsius or Fahrenheit.  To accurately measure temperature the surface temperature sensor should be mounted in direct contact with the surface to be measured.  Using the surface temperature sensor's included silicone heat transfer compound will ensure that temperature transfer from the monitored surface to the sensor's heatsink will be efficient, minimizing the impact of ambient temperature on the measurement.  Dirt or other insulators, like paper labels, can cause errors in the surface temperature sensor's reading or cause slower response times.

Surface Temperature Sensors Specifications
Surface Temperature Sensor
Sensor Type: 100ohm Platinum Class A RTD
Output: 4-20 mA
Range: -58F to +185F (-50C to +85C)
Accuracy: 0.5F (0.25C)
Operating Voltage: 10-36 VDC
Current Draw: Same as sensor output current
Warm-Up Time: 3 seconds minimum
Adhesive Type: 3M #4910 Acrylic
Storage Temp: -67F to +195F (-55C to +90C)
Sensing Surface: 0.75x1.5 inch (19x38 mm) Aluminum
Housing: 2.0x1.1x3.8 inch (5x2.8x9.7 cm)(WxHxL) ABS
Weight: 13oz (368g) with 25 ft of cable
Surface Temperature Sensors Options
WE710 Surface Temperature Sensors (PN# EFA000)
Includes 25 ft of cable.
WQEXC Extra Cable
Standard Surface Temperature Sensors include 25 ft of cable, but can be purchased with up to 500 ft of cable.
WE700 Air Temperature Sensor  
EZ100 Surface Temperature Sensor Display
LCD readout display for both portable use and permanent installations.
Temperature sensor,Humidity transmitter display
GL500 Surface Temperature Sensor Recorder
Surface temperature recorder for sensor datalogging.  Includes Global Logger Software.  With weather proof enclosure and 12V battery.
Humidity and Temperature recorder
PC300 Surface Temperature Meter and Alarm  
TLC 730 Handheld Infrared Thermometer  
TFI 550 Non-contact Thermometer  
TFH 610 Handheld Hygrothermometer  
RH300 Portable Psychrometer  
RH305 Digital Psychrometer Kit
Includes RH300 psychrometer, external temperature probe, 33% and 75% calibration bottles, 2 AAA batteries and carrying case.
EBI-20-T-Set Temperature Datalogger Kit
Includes EBI-20-T datalogger, Winlog.basic software, EBI-20 interface, and USB cable.
EBI 100-T101 Temperature Data Logger  
RH520A Paperless Humidity/Temperature Chart Recorder  
WE Weather Sensors  
WE800 Weather Station Data Logger
This system is designed for remote monitoring sites.
WE900 4-20mA Weather Station
This system is designed for integration with existing SCADA, PLC, or RTU systems.

  Back to GlobalWater Main Page    |    Back to Testech Home Page    |    M2M Remote Monitoring