Wind speed alarms and wind speed recorders for wind monitoring

wind speed alarms,wind speed recorders,wind speed sensors<

  • 4-20 mA output
  • Marine grade cable with strain relief
  • Fully encapsulated electronics
  • 1 mounting elbow
Wind Speed Sensor Product Description

The Global Water Wind Speed Sensor is constructed of high-impact materials, ensuring its durability and ruggedness even in severe weather conditions.  The wind speed indicator has a very low threshold, and it responds accurately to subtle changes in wind speed.  The wind speed transmitter is molded to 25 of marine grade cable, with lengths up to 500 available upon request.  The wind speed sensor's output is 4-20 mA with a two wire configuration.  The wind speed transmitter's electronics are completely encapsulated in marine grade epoxy within a rubber sleeve.

Global Water's PC300 Wind Speed Alarm and Controller uses the Wind Speed sensor's output to trigger motors and alarms.  In addition, Global Water offers the GL500 Wind Speed Recorder, which adds recording capabilities to the Wind Speed indicators.  The GL500 Wind Speed Recorder connects to the anamometer's 4-20mA output to record data.

Why Measure Wind Speed?
Wind speed is an important weather parameter to monitor and record for many applications including meteorology, aviation, shipping, insdustry, construction, and many more.  Some of the more common applications are for predicting and supporting weather forcasts, determining the saftey of operating mechanical equipment like cranes and lifts in industry, estimating the efficiency of operating power generating wind farms, navigation and safe operation in the shipping industry, aircraft safety, wastewater and landfill odor control, and others.

Wind Speed is caused by air pressure gradients or the regions between weather fronts, air moves in the direction of the low pressure system.  The steeper the gradient the stronger the wind.  Additionally, wind speed is determined by many other factors including the Coriolis effect, friction, and land topography.  Wind speed is typically reported in meters per second or miles per hour in the United States.  For the shipping or boating industry wind speed can be reported in knots (a knot equal to one nautical mile per hour or approximately 1.15 miles per hour or approximately 0.5 meters per second).

Wind Speed Sensor Specifications

Type: Three cup anemometer
Threshold: <=3 MPH (1.35 m/s)
Output: 4-20 mA
Range: 0 to 50 m/s (110 MPH)
Accuracy: .2 MPH over the range 11 to 55 MPH
Operating Voltage: 10-36 VDC
Current Draw: Same as sensor output
Warm Up Time: 3 seconds minimum
Operating Temp: -40 to +55C
Sensor Size: 7" diameter x 8 1/2"
Weight: 1lb.

Wind Speed Sensor Options

WE550 Wind Speed Sensor    
WQEXC Extra Cable
Standard Wind Speed sensors include 25' of cable, but can be purchased with up to 500' of cable.
GL500 Wind Speed Recorder
Wind Speed recorder for sensor datalogging.  Includes Global Logger Software.  With weather proof enclosure and 12V battery.
  Wind Speed recorder
Wind Alarm Controller
Includes wind alarm controller, wind speed sensor, stub-mast, and mounting hardware.
PC300 Wind Speed Alarm and Controller    
WE Weather Sensors    
WE800 Weather Station Data Logger
This system is designed for remote monitoring sites.
WE900 4-20mA Weather Station
This system is designed for integration with existing SCADA, PLC, or RTU systems.
EZ100 Wind Speed Indicator Display
LCD readout display for both portable use and permanent installations.
  Wind Speed sensor,Wind Speed indicator display

  Back to GlobalWater Main Page    |    Back to Testech Home Page    |    M2M Remote Monitoring