TX100/200 ADJUSTABLE TURBINE FLOW SENSOR
Adjustable depth turbine insertion flow sensors
 
adjustable turbine flow sensors FEATURES:
  • Two sizes fit entire pipe range: 3" to 10", 10" to 48"
  • Turbine rotor to optimize minimum flow limits
  • High quality ruby bearings for long life
  • One easily-replaced moving part
  • Uses standard NPT threaded pipe fittings or saddles
  • Optional 4-20mA flow rate and totalizer display
  • Alternatively, signal can be sent directly to a PLC or other control
 
Adjustable Turbine Insertion Flow Sensors Product Description

The TX100/200 series, adjustable insertion turbine flow sensors, use ruby bearings and a non-drag pick-off to achieve a wide flow range and long life.  A sensor detects the passage of miniature magnets in the rotor blades.  (Magnets are in 2 or 4 blades only.)  The resulting square-wave signal can be sent for hundreds of feet without a transmitter, over unshielded cable.  This square wave signal can be sent directly to a PLC or other control, or can be converted using a blind 4-20mA output or flow rate and totalizer display.

Designed for modularity and versatility, the TX100/200 series, adjustable insertion turbine flow sensors, have a current-sinking pulse output, which can be combined with the appropriate transmitter or indicator depending on the application.  For rate and total display the FT415 or FT420 flow indicator can be mounted directly on the TX100/200 series adjustable insertion turbine flow sensors.  For a 4-20mA analog output only, the AO55 blind 4-20mA converter can be mounted directly onto the meter.  If the TX100/200 series, adjustable insertion turbine flow sensors, are being used with a programmable controller, the output signal can be fed direct with no other conditioning required.

The installation fitting of the TX100/200 series adjustable turbine flow sensor is standard 1-1/2" male NPT, and can be directly threaded into ordinary saddles or threaded weld fittings.  A depth adjustment system allows two basic sizes to cover pipe sizes from 3" to 48".

Adjustable Turbine Insertion Flow Sensors Specifications

Accuracy: +1% of full scale
Flow Range: 0.2 - 30 ft/sec (.06 - 9.14 m/sec)
Sensor/Output: Hall Effect Sensor - 12 VDC current sinking pulse

Maximum Pipe Pressure: 200 psi (14 bar)
Maximum Temperature: 200 F (93 C)
Pipe Size:
TX101: 3" - 10" (50-250mm)
TX201: 10" - 48" (250-1200mm)
Fitting Size: 1-1/2" NPT
Insertion Force: 0.44 x pressure in pipe
Power: 5 - 24 VDC, 1.5 mA
Materials:
Sensor Body: Brass, 316 SS
Rotor: Polypro
Shaft: Nickel-bound tungsten carbide
Bearings: Ruby
Cable: #22 AWG 3-con 18' (6m)
Maximum Cable Run: 2,000' (650m)

Adjustable Turbine Insertion Flow Sensors Options

TX101B Adjustable Turbine Insertion Flow Sensors
Brass adjustable turbine insertion flow sensors, for 3" to 10" pipe diameter.
   
TX101S Adjustable Turbine Insertion Flow Sensors
Stainless steel adjustable turbine insertion flow sensors, for 3" to 10" pipe diameter.
   
TX201B Adjustable Turbine Insertion Flow Sensors
Brass adjustable turbine insertion flow sensors, for 10" to 48" pipe diameter.
   
TX201S Adjustable Turbine Insertion Flow Sensors
Stainless steel adjustable turbine insertion flow sensors, for 10" to 48" pipe diameter.
   
TX115/215 Series Hot-tap Adjustable Depth Insertion Turbine Flow Sensors
Turbine insertion flow meters with isolation valves.
  adjustable turbine flow sensors
Optional Output Meters/Converters
FT415M Battery Powered Pulse Output and Display
Meter mounted, 3V replaceable Lithium.
  adjustable turbine flow sensors
FT420M Pulse to 4-20mA Output Display
Turbine Flow Sensor mounted, 12-24VDC.
  adjustable turbine flow sensors
AO55M Blind 4-20ma Converter
Electromagnetic Flow Meter mounted.
  adjustable turbine flow sensors
Related Products
EX80 Series Fixed Depth Insertion Magmeter
Stainless Steel or PVC, for 1" to 8" size.
  Insertion electromagnetic flow sensors
EX100/200 Series Adjustable Depth Electromagnetic Flow Sensor
Stainless Steel and Brass Insertion Electromagnetic Flow Sensor, for 3" to 48" pipe diameter.
   
TX80 Series Fixed Depth Insertion Turbine Flowmeters
Stainless Steel, Brass, or PVC, for 1-1/2" to 8" size.
   
SPX Inline Low Flow Meter
Chemical resistant low flow meters for small diameter pipes
   
WMX101 Magnetic Flow Meter
The WMX101-Series flanged magnetic flow meters have no rotor to stop turning or bearings to wear out and are virtually maintenance-free, especially in applications where debris or sand would foul most industrial mechanical flowmeters.
   
FM500 Ultrasonic Flow Meter
Transit time/Doppler flowmeter with datalogger & 10 FT cable.
   
GL500 Adjustable Turbine Flow Recorder
Adjustable turbine flow recorder for flow recording.  Requires an external 12 VDC power source.  With weather proof enclosure and 12V battery.
 

  Back to GlobalWater Main Page    |    Back to Testech Home Page    |    M2M Remote Monitoring