Satellite Internet-Based Data Acquisition and Control
telemetry system,satellite telemetry FEATURES:
  • Remote data and control anywhere -- guaranteed!
  • Receive data by internet on your computer
  • Near real time spreadsheet data and control
  • Alarms by text to your cell phone or email
  • Interface to almost any sensor
  • Easy installation - just install antenna and turn it on
  • Low cost/economical
  • Solar, battery, or AC power
Satellite Telemetry Product Description

Global Water’s SIT65 Satellite Internet Telemetry provides the easiest and most economical way to collect environmental data remotely.  The remote satellite telemetry system uses the latest satellite and Internet technologies to bring data to your computer in near real time.  The satellite internet telemetry system includes a data transmitter and a rechargeable battery enclosed in a rugged, rain proof, and lockable enclosure; a ground-to-satellite antenna; and mounting hardware.

Flexible Inputs and Outputs
The SIT65 Satellite Internet Telemetry system will interface with most sensors, including all of Global Water’s rugged 4-20 mA sensors.  The satellite internet telemetry system includes up to eight analog inputs, three factory programmable status/accumulator inputs, and up to two open collector outputs.

Simple Installation and Operation
The SIT65 Satellite Internet Telemetry system is simple to set up and operate: just hook up your sensors, point the antenna to the sky, and turn on your telemetry equipment.  Satellite service is available anywhere in the world for the satellite telemetry system.  Data is transmitted from the satellite telemetry system based on programmed time intervals and/or alarms and is transferred via satellite and Internet to a dedicated web page.  You can monitor and collect data anywhere you have web access.

Power Options
The SIT65 Satellite Internet Telemetry system includes a 5 AH gel cell battery and a NEMA 4 enclosure.  For long term AC power, we recommend the AC Charger.  We also offer solar panels to support your remote satellite telemetry installation.  A Smart Charger is recommended for all solar powered satellite internet telemetry system installations.

Satellite Telemetry Specifications

Inputs: Up to 8 analog 4-20mA, 0-1mA, 0-500uA, 0-5VDC and 0-10VDC
     Up to 3 digital status or accumulator inputs
     Dedicated battery voltage monitor
Outputs: Up to 2 open collector control outputs
Power Requirements: 12V DC
Battery: Rechargeable 12V 5AH Gel Cell
Current Draw: 5mA minimum standby; 80mA receiving; 2A transmitting
Operating Temperature: -40° to +140°F (-40° to +60°C) Battery may not apply
Humidity: 0-100% non-condensing
Antenna Cable: 16' standard
Dimensions: Inner 10x12x6 in (25.4x30.5x15.2cm), Outer Lid 12x14 in (30.5x35.5 cm)
Weight: 21 lbs (9.5 kg) shipping weight

Satellite Telemetry Options

SIT65 Satellite Internet Telemetry
Includes the following parts: transmitter, antenna with 16’ cable, rugged NEMA 4 enclosure, a rechargeable 5 AH gel cell battery, and mounting hardware.
FM0100 Satellite Telemetry Subscription Service    
Addtional Satellite Telemetry Antenna Cable    
FE0400 AC Charger Option
For continous operation using AC power use the FE0400 and FN0000 smart charger.
BC100 Smart Charger
Maintain constant battery voltage and increase battery life.
DC Power Supplies    
SP102 Solar Panel (5 Watts, 300mA minimum)
Minimum of two (2) recommended for all remote satellite systems.
  Satellite Internet Telemetry Solar Panel
SP101 Solar Panel (2 Watts, 80mA minimum)
Supplemental power for remote sites.
  Satellite Internet Telemetry Solar Panel
RM100 Remote Radio Telemetry System    
iRIS 220 Wireless Data Logger
Includes 2-Analog (0-5V), 2-Digital Inputs, 2-Digital Outputs
GL500 Datalogger
Multichannel recorder for sensor datalogging.  Includes Global Logger Software.  With weather proof enclosure and 12V battery.
WE900 4-20mA Weather Station    
Water quality sensors

  Back to GlobalWater Main Page    |    Back to Testech Home Page    |    M2M Remote Monitoring