MULTI 3500i HANDHELD MULTIPARAMETER METERS
Handheld multiparameter meter for monitoring pH, mV, oxygen, conductivity and ISE
 
Handheld multiparameter meter FEATURES:
 
  • Accurate, rugged and easy to use
  • Displays three parameters at once
  • Works with the new MPP 350 multi-parameter probe
 
Handheld Multiparameter Meters Product Description

With its ability to measure pH, mV, oxygen, conductivity and ISE, the Multi 3500i, Handheld Multiparameter Meters are the perfect choice for all of your water, wastewater and environmental field measurement needs.  Like all WTW field instruments, the Mult 3500i, digital multiparameter meter is designed to stand up to the rigors of daily plant and field conditions while being accurate and easy to use.  The handheld multiparameter meter's bright backlit screen can display pH, oxygen, conductivity and temperature simultaneously.

Easy to use, the Multi 3500i, Handheld Multiparameter Meters feature a high resolution, high precision, simple, menu-driven user interface.  The digital multiparameter meter has a datalogger, memory for 1,800 data sets and a real-time clock that support good laboratory practice (GLP) requirements.  The Multi 3500i, handheld multiparemeter meters won't let you down with their built-in NiMH rechargeable battery for up to 500 hours of continuous measurements (AC adaptor included).  Combined with the MPP 350 multiparameter probe the digital multiparameter meter is ideal for environmental field measurements.  But the Multi 3500i, handheld multiparameter meters are also at home in your lab when used with the ConOx conductivity/oxygen sensor.  In addition, all the currently compatible WTW pH, combination ion specific, oxygen and conductivity sensors can be used to extend the usefulness of the handheld multiparameter meter.

MPP 350 Multiparameter Meter Probe
Wherever simultaneous measurement of dissolved oxygen, conductivity, and pH or ORP is required the MPP 350 is the probe or choice for the Multi 3500i, handheld multiparameter meters.  With a diameter of only 1.6 in (41.5 mm) and a length of 11.42 in (29 cm), this multiparameter meter probe is usable in a wide range of applications.  The Multiparameter Meter Probe is suitable for measurements in lakes, rivers, seawater and brackish water, and in monitoring or groundwater wells to a maximum depth of 330 ft. (100 m).  The special pH sensor SensoLyt® MPP-A, not included with MPP 350 multiparameter meter probe, provides reproducible measurement values in water, even at low conductivity levels.  The special ORP sensor SensoLyt® MPP-A Pt, not included with MPP 350 multiparameter meter probe, allows you to measure the ORP voltage of your sample.  For cable lengths greater than 20 ft. (6 m) a battery operated stirrer is included.  The conductivity measuring cell with WTW's proven 4-pole-measurement technology has a measuring range of 1 uS/cm to 2 S/cm.  The MPP 350 is available with several different cable lengths up to 330 ft (100 m).  Accessories include specialized calibration vessels.  Two field kits are available which include: a case, Multi 3500i handheld multiparameter meter, accessories and an MPP 350 multiparameter meter probe with either a 20 ft. (6 m) or 81 ft. (25 m) cable length.

ConOx: Conductivity and Oxygen Measurement with fully automatic Salinity Correction
The ConOx multiparameter meter probe is great for all water analysis applications in the field and in the lab.  The Multi 3500i handheld multiparameter meters use this slender and handy multiparameter meter probe to measure three parameters: conductivity, dissolved oxygen and temperature.  The multiparameter meter probe's oxygen module can be easily removed and works according to the time-proven galvanic principle.  Low-maintenance and ready for use any time you need it, the multiparameter meter probe's oxygen module also includes the OxiCal® CX calibration vessel.  The multiparameter meter probe's conductivity sensor features the time-proven 4-electrode system and may be used without the oxygen module.  Easy to clean, the multiparameter meter probe's conductivity sensor is capable of accurate measurements even when used in environments that would foul conventional electrodes.  The multiparameter meter probes are available with cable lengths 4.9 ft, 9.8 ft, 19.7 ft, 32.8 ft, 49.2 ft, 65.6 ft (1.5 m, 3 m, 6 m, 10 m, 15 m, 20 m).

Handheld Multiparameter Meters Specifications

  pH measurement Oxygen measurement Conductivity measurement ISE measurement
RANGE/RESOLUTION pH:
     -2.000 to 20.000 / 0.001
     -2.00 to 20.00 / 0.01
mV:
     -999.9 to +999.9 / 0.1
     -2000 to +2000 / 1
Temp.:
     23 to 221 °F (-5.0 to 105.0 °C) / 0.1 (0.1)
O2 Concentration:
     0.00 to 20.00 mg/l / 0.01
     0.0 to 90.0 mg/l / 0.1
O2 Saturation:
     0.00 to 200.0% / 0.1
     0.0 to 600% / 1
O2 Partial Pressure:
     0.0 to 200.0 mbar / 0.1
     0.0 to 1250 mbar / 1
Temp:
     32 to 122 °F (0.0 to 50.0 °C) / 0.1 (0.1)
Conductivity:
     0.0 to 2000 mS/cm in five ranges / 0.01 to 1 in three ranges
     0.00 to 20.00 uS/cm (K=0.1 cm-1)
     0.000 to 2.000 uS/cm (K=0.01 cm-1)
Salinity:
     0.0 to 70.0 according to the IOT table / 0.1
TDS:
     0 to 2000 mg/l factor can be set between 0.40 and 1.00 / 1
Temp:
     23 to 221 °F (-5.0 to 105.0 °C) / 0.1 (0.1)
ISE:
     0.000 to 2000 mg/l in 4 ranges / 0.001 to 1 in 4 ranges
ACCURACY (+ 1 DIGIT) pH:
     + 0.004 over the temperature range from +59 to +95°F (+15 to +35°C)*
mV:
     (-999.9 to +999.9) + 0.2 over the temperature range from +59 to +95°F (+15 to +35°C)
     (-2000 to +2000) + 1 over the temperature range from +59 to +95°F (+15 to +35°C)
Temp:
     (NTC 30 kΩ)+ 0.2 over the temperature range from 32 to +131°F (0 to +55°C)
     (PT 1000) + 0.3 over the temperature range from 32 to +131°F (0 to +55°C)

 

* when measuring in a range of + 2 pH around a calibration point.

O2 Concentration:
     + 0.5 % of measured value at ambient temperature +41 to +86 °F (+5 to +30 °C)
O2 Saturation:
     + 0.5 % of measured value when measuring in the range of + 10 K around the calibration temperature
O2 Partial Pressure:
     + 0.5 % of measured value at ambient temperature +41 to +86 °F (+5 to +30 °C)
Conductivity:
     + 0.5 % of value
Salinity:
     + 0.1 from +41 to +77 °F (+5 to +25 °C)
     + 0.1 from +77 to +86 °F (+25 to +30 °C)
TDS:
     + 1 mg/l
Temp:
     + (NTC 30 kΩ)+ 0.2 over the temperature range from 32 to +131°F (0 to +55°C)
     (PT 1000) + 0.3 over the temperature range from 32 to +131°F (0 to +55°C)
 
N/A
TEMPERATURE COMPENSATION Automatic:
     23 to 221 °F (-5 to +105 °C)
Manual:
     -4 to 266 °F (-20 to +130 °C)
32 to 122°F (0 to +40 °C)
<2% from 32 to 104 °F (0 to +40 °C)
23 to 212°F (-5.0 to +100 °C)
 
  • Linear and non-linear function for ultrapure and natrueal waters
  • Linear compensation from 0.01 % to 3.00 % / K
  • Compensation can be switched off
Manual:
     -4 to 266 °F (-20 to +130 °C)
AIR PRESSURE COMPENSATION N/A Automatic with built-in pressure sensor (500 to 1100 mbar) N/A N/A
SALINITY CORRECTION N/A Automatic or Manual N/A N/A
REFERENCE TEMPERATURE N/A N/A 68 °F/77 °F (20 °C/25 °C) selectable N/A
CELL CONSTANTS N/A N/A Fixed:
     0.01 cm-1
Freely Selectable:
     0.090 to 0.110 cm-1
     0.250 to 25.000 cm-1
Calibratable:
     0.450 to 0.500 cm-1
     0.800 to 1.200 cm-1
N/A

Serial Interface:
     Baud Rate: Adjustable: 1200, 2400, 4800, 9600, 19200 Baud
     Type: RS232, data output
     Data Bits: 8
     Stop Bits: 8
     Parity: None
     Handshake: RTS/CTS
     Cable Length: Max. 15m
Ambient Conditions:
     Storage: -13 to +149 °F (-25 to +65 °C)
     Operation: 14 to 131 °F (-10 to +55 °C)
     Climatic Class: 2
Power:
     Rechargeable Batteries: 4 x 1.2 V nickel metal hydride (NiMH), type AA
     Operational Life: up to 500 h with one battery charging
     Plug-in Power Supply (Charging Device):
          Input: 100 to 240 V ~ / 50 to 60 Hz / 400 mA
          Output: 9 V = / 1.5 A
          Connection max. overvoltage category II
IP Rating: IP-66
Certifications: cETLus, CE
Electrical Safety: Protective class III
Weight: 0.7 lbs (0.3 kg) (without plug-in power supply)
Size: 6.8x3.1x1.5 in (172 x 80 x 37 mm)

Handheld Multiparameter Meters Options

Multi 3500i Kit Handheld Multiparameter Meter
Includes Multi 3500i, SenTix® 41-3 pH electrode, ConOx-3 conductivity/oxygen electrode, PC comm. pkg, case & acc..  All sensors have 9.8 ft (3 m) of cable.
   
MPP 350-3 Multiparameter Meter Probe (with 9.8 ft (3 m) cable)
Measure oxygen, conductivity and pH (with SensoLyt® MPP-A) or ORP (with SensoLyt® MPP-A Pt).
   
MPP 350-10 Multiparameter Meter Probe (with 32.8 ft (10 m) cable)
Measure oxygen, conductivity and pH (with SensoLyt® MPP-A) or ORP (with SensoLyt® MPP-A Pt).
   
MPP 350-40 Multiparameter Meter Probe (with 131.2 ft (40 m) cable)
Measure oxygen, conductivity and pH (with SensoLyt® MPP-A) or ORP (with SensoLyt® MPP-A Pt).
   
MPP 350-100 Multiparameter Meter Probe (with 328 ft (100 m) cable)
Measure oxygen, conductivity and pH (with SensoLyt® MPP-A) or ORP (with SensoLyt® MPP-A Pt).
   
SensoLyt® MPP-A Armored pH electrode for MPP 350    
SensoLyt® MPP-A Pt Armored ORP electrode for MPP 350    
ConOx-3 Combined Multiparameter Meter Probe (with 9.8 ft (3 m) cable)
Measure oxygen and conductivity.
   
ConOx-10 Combined conductivity/oxygen probe (with 32.8 ft (10 m) cable)
Measure oxygen and conductivity.
   
ConOx-20 Combined conductivity/oxygen probe (with 65.6 ft (20 m) cable)
Measure oxygen and conductivity.
   
A 325/S Stainless steel armoring for ConOx    
ConOx REPLACEMENT PARTS
401070 Oxygen sensor module for ConOx Multiparameter meter probe
Includes 3 membranes, cleaning solution, OxiCal CX, & accessories.
   
401080 Accessories for ConOx Multiparameter meter probe
Includes caps, O-ring grease, sponge and cap for OxiCal CX.
   
RELATED PRODUCTS
pH/Ion 3400i Ion Selective Electrode Analyzer
Electrodes not included.
   
Multi 1970i Portable Multi-parameter Meter
Multiparameter meter with universal AC power supply.  Probes not included.
   
Multi 3400i Kit Multi-parameter Meter
Includes Multi 3400i, SenTix® 41-3 pH electrode, CellOx 325-3 oxygen electrode, TetraCon 325-3 conductivity sensor, Tech. buffers 4 and 7, 3 M KCl, cleaning solution, 3 exch. membr. heads, electrolyte, abrasive foil, cond standard (1413 µS/cm)  All sensors have 9.8 ft (3 m) of cable.
   
U-22XD Multiparameter Probe
Use the multiparameter probe to monitor 10 different parameters, including total suspended solids, water depth, and ORP.
   
W-23XD Water Quality Sonde
Water quality instrumentation for simultaneously measuring up to 13 different parameters.
   
Water quality sensors for permanent installation.
 

  Back to GlobalWater Main Page    |    Back to Testech Home Page    |    M2M Remote Monitoring