bdiPro

High-speed Flash Memory on-board Programming

The bdiPro is a powerful software package, allowing on-board programming with ABATRON's BDM/JTAG Interfaces BDI1000, BDI2000 and BDI3000. bdiPro eliminates the inefficient, individual chip programming, particularly for surface-mounted designs. The unprogrammed memories can be soldered to the printed circuit board and programmed simultaneously on a just-in-time basis. The Windows based user interface offers easy operation and several advantages for on-board programming.

Highlights

Programming Speed with BDI1000 & BDI2000

Target Configuration BDI1000 (Kbytes/s) BDI2000 (Kbytes/s)
AMD 29F040 x 32 bit / MPC860 @ 50 MHz 90 170
AMD 29F016 x 32 bit / MPC68360 @ 25 MHz 90 130
LH 28F016 x 32 bit / MPC8260 @ 40 MHz - 40
HC12 Internal Flash / HC9S12DP256 @ 24 MHz 33 -
AT49BV1614 x 16 bit / AT91R40008 @ 66 MHz 90 110

Programming Speed with BDI3000

Target CPU Flash JTAG Clock Kbytes/s
MPC8349E MDS I28F640J3 / 16-bit 32 MHz 124
EVKIT 405EP AM29LV160DB / 16-bit 32 MHz 180
M5329EVB I28F160C3 / 16-bit 16 MHz 110
PXA250 I28F128J3 / 32-bit 32 MHz 220
ARM7TDMI SST39VF400 / 16-bit 32 MHz 130
MPC8560ADS I28F640J3 / 32-bit 32 MHz 190
MPC8260FADS LH28F016 / 32-bit 32 MHz 110
DB1100(MIPS32) AM29LV640MH/L / 32-bit 32 MHz 104

Supported Target Families

As of April 15, 2008 the BDI 2000 hardware is no longer available for the bdiGDB. Abatron will continue to support the BDI2000 with software updates and technical support. In addition, any new CPU support or enhancements that are added to the BDI3000 firmware will also be added to the BDI2000 firmware.


Back to Abatron Main Page    |    Back to Testech Home Page    |    Compiler    |     RTOS    |    Emulator/Debugging